Microchip Technology ATAES132A-SHEQ-B

ATAES132A-SHEQ-B Overview
Package 8-SOIC (0.154, 3.90mm Width) contains the ICs.The Tube package contains integrated circuit.Mounting is done using the Surface Mount method.Authentication Chip is the type of the integrated circuit system.By searching for the ATAES132A family, similar integrated circuit systems may be found.In Networking and Communications, the ICs is appropriate.The ICs solutions has a total of 8 terminations.In this ICs applications, there are 8 pins that are available for use.In this case, the logic gate IC should be run at 3.3V.Surface Mount is suggested as the mounting point for this ICs application.The ICs complete is recommended for use when the temperature is below 85°C.Operating temperatures should not be lower than -40°C.I would like to point out that this electrical ICs application belongs to the series CryptoAuthentication?.In this integrated circuit, the supply voltage can be set to 5.5V.This integrated circuit requires a voltage of at least 2.5V.The logic IC's frequency is set to 10MHz.Memory type EEPROM is used in this integrated circuit chip.This logic ICs has a maximum supply current of 0.01mA.In this integrated circuit board, we have included a number of additional features that you can read about:IT ALSO HAVE USER ZONE WRITE CYCLE TIME 9 MS.A key point to note is that this memory has 3.9kB size.1 ports are embedded in the logic ICs.

ATAES132A-SHEQ-B Features
Applications : Networking and Communications
It belongs to CryptoAuthentication? Series
Memory Type : EEPROM
Memory Size: 3.9kB

ATAES132A-SHEQ-B Applications
There are a lot of Microchip Technology ATAES132A-SHEQ-B Specialized ICs applications.

Portable Instruments
Authentication of Medical Sensors and Tools
Secure Download and Boot
DeviceNet Applications
PDAs and Palmtop Devices
Digital Still Cameras
Message Security
Membrane Keypads
Peripheral Authentication
Anti-cloning