Texas Instruments ADS8513IDWRG4

Description
The ADS8513 is a low-power, single 5V supply, 16-bit sampling analog-to-digital (A/D) converter. It contains a complete 16-bit capacitor-based, successive approximation register (SAR) A/D converter with sample and hold, clock, reference, and serial data interface. The converter can be configured for a variety of input ranges including ±10V, ±5V, 0V to 10V, and 0.5V to 4.5V. A high-impedance, 0.3V to 2.8V input is also available with input impedance greater than 10MQ. For most input ranges, the input voltage can swing to 25V or -25V without damage to the converter.
An SPI-compatible serial interface allows data to be synchronized to an internal or external clock. The ADS8513 is specified at 40kSPS sampling rate over the -40°C to 85°C industrial temperature range.

Features
40kSPS Minimum Sampling Rate
Very Low Power: 24mW Typ
±3.33V, ±5V, ±10V, 4V, and 10V Input Ranges
89dB SNR with 10kHz Input
±2LSB Max INL
-1/ 2LSB Max DNL, 16-Bit NMC
±10mV BPZ, ±2.5ppm/°C BPZ Drift
89dB Min SINAD, 102dB Min SFDR
Uses Internal or External 2.5V Reference
No External Calibration Resistors Required
Single 5V Analog Supply:
32.5mW Max Power Dissipation
50μW Max Power-Down Mode
SPI-Compatible Serial Port up to 20MHz, with Master/Slave Feature
Global CONV and 3-Stated Bus for Multi-Chip Simultaneous S/H Operation
Pin-Compatible with 16-Bit ADS7813 and 12-Bit ADS7812 and ADS8512
SO-16 Package

Applications
Industrial Process Control
Test Equipment
Robotics
DSP Servo Control
Medical Instrumentation
Portable Data Acquisition Systems