Analog Devices Inc. ADG819BRM
- Part Number:
- ADG819BRM
- Manufacturer:
- Analog Devices Inc.
- Ventron No:
- 3671973-ADG819BRM
- Description:
- IC SWITCH SPDT 8MSOP
- Datasheet:
- ADG819BRM
Analog Devices Inc. ADG819BRM technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. ADG819BRM.
- Mounting TypeSurface Mount
- Package / Case8-TSSOP, 8-MSOP (0.118, 3.00mm Width)
- Surface MountYES
- Number of Pins8
- Operating Temperature-40°C~125°C TA
- PackagingTube
- JESD-609 Codee0
- Pbfree Codeno
- Part StatusObsolete
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations8
- ECCN CodeEAR99
- Resistance600mOhm
- SubcategoryMultiplexer or Switches
- Max Power Dissipation5μW
- TechnologyCMOS
- Terminal PositionDUAL
- Terminal FormGULL WING
- Peak Reflow Temperature (Cel)240
- Number of Functions1
- Supply Voltage3V
- Terminal Pitch0.65mm
- Reflow Temperature-Max (s)30
- Base Part NumberADG819
- Pin Count8
- Number of Outputs2
- Power Supplies3/5V
- Number of Channels1
- Max Supply Voltage5.5V
- Min Supply Voltage1.8V
- Nominal Supply Current2μA
- Power Dissipation5μW
- Max Supply Current2μA
- Turn On Delay Time45 ns
- Supply TypeSingle
- Turn-Off Delay Time16 ns
- 3db Bandwidth17MHz
- On-State Resistance (Max)600mOhm
- Multiplexer/Demultiplexer Circuit2:1
- Off-state Isolation-Nom71 dB
- Current - Leakage (IS(off)) (Max)250pA
- Channel Capacitance (CS(off), CD(off))80pF
- On-state Resistance Match-Nom0.06Ohm
- Switch CircuitSPDT
- Switch Time (Ton, Toff) (Max)45ns, 16ns
- Charge Injection20pC
- Channel-to-Channel Matching (ΔRon)60m Ω
- Crosstalk-72dB @ 100kHz
- SwitchingBREAK-BEFORE-MAKE
- Switch-on Time-Max60ns
- Voltage - Supply, Single (V )1.8V~5.5V
- Length3mm
- Radiation HardeningNo
- RoHS StatusNon-RoHS Compliant
- Lead FreeContains Lead
ADG819BRM Overview
Analog Devices Inc. offers the ADG819, a versatile chip in the Interface - Analog Switches, Multiplexers, Demultiplexers category. With a Pin Count of 8 and Power Supplies of 3/5V, this chip is designed for precision and flexibility. It has a Pbfree Code of no and a Base Part Number of ADG819. Additionally, it boasts impressive Off-state Isolation-Nom of 71 dB, a low Current - Leakage (IS(off)) (Max) of 250pA, and minimal Charge Injection of 20pC. While it does not have Radiation Hardening capabilities, it is still a reliable choice. Please note that the RoHS Status is Non-RoHS Compliant.
ADG819BRM Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 17MHz
ADG819BRM Applications
There are a lot of Analog Devices Inc. ADG819BRM Analog Switches & Multiplexers ICs applications.
High-Voltage
Isolation
FTTH
T1/E1 Terminals
Precision data acquisition
Public switching systems
Multi-Line E1 Interface Cards
ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
Remote Powered Equipment
Channel Banks
Analog Devices Inc. offers the ADG819, a versatile chip in the Interface - Analog Switches, Multiplexers, Demultiplexers category. With a Pin Count of 8 and Power Supplies of 3/5V, this chip is designed for precision and flexibility. It has a Pbfree Code of no and a Base Part Number of ADG819. Additionally, it boasts impressive Off-state Isolation-Nom of 71 dB, a low Current - Leakage (IS(off)) (Max) of 250pA, and minimal Charge Injection of 20pC. While it does not have Radiation Hardening capabilities, it is still a reliable choice. Please note that the RoHS Status is Non-RoHS Compliant.
ADG819BRM Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 17MHz
ADG819BRM Applications
There are a lot of Analog Devices Inc. ADG819BRM Analog Switches & Multiplexers ICs applications.
High-Voltage
Isolation
FTTH
T1/E1 Terminals
Precision data acquisition
Public switching systems
Multi-Line E1 Interface Cards
ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
Remote Powered Equipment
Channel Banks
ADG819BRM More Descriptions
Analog Switch Single SPDT Automotive 8-Pin MSOP Tube
Analog Switch ICs 500mOhm 5.5V CMOS 2:1 Mux/SPDT
IC SWITCH SPDT X 1 600MOHM 8MSOP
The ADG819 is a monolithic, CMOS SPDT (single pole, double throw) switch. This switch is designed on a submicron process, that provides low power dissipation yet gives high switching speed, low On Resistance and low leakage currents. Low-power consumption and operating supply range of 1.8 V to 5.5 V make the ADG819 ideal for battery-powered, portable instruments. Each switch of the ADG819 conducts equally well in both directions when on. The ADG819 exhibits break-before- make switching action, thus preventing momentary shorting when switching channels. (See the ADG820 for a switch exhibiting make-before-break action.) The ADG819 is available in a 6-lead SOT-23 package and an 8-lead µSOIC package as well as a 2x3 array MicroCSP package. This chip occupies only a 2.18mm x 1.14mm area, thus making it the ideal candidate for space-constrained applications.
Analog Switch ICs 500mOhm 5.5V CMOS 2:1 Mux/SPDT
IC SWITCH SPDT X 1 600MOHM 8MSOP
The ADG819 is a monolithic, CMOS SPDT (single pole, double throw) switch. This switch is designed on a submicron process, that provides low power dissipation yet gives high switching speed, low On Resistance and low leakage currents. Low-power consumption and operating supply range of 1.8 V to 5.5 V make the ADG819 ideal for battery-powered, portable instruments. Each switch of the ADG819 conducts equally well in both directions when on. The ADG819 exhibits break-before- make switching action, thus preventing momentary shorting when switching channels. (See the ADG820 for a switch exhibiting make-before-break action.) The ADG819 is available in a 6-lead SOT-23 package and an 8-lead µSOIC package as well as a 2x3 array MicroCSP package. This chip occupies only a 2.18mm x 1.14mm area, thus making it the ideal candidate for space-constrained applications.
The three parts on the right have similar specifications to ADG819BRM.
-
ImagePart NumberManufacturerMounting TypePackage / CaseSurface MountNumber of PinsOperating TemperaturePackagingJESD-609 CodePbfree CodePart StatusMoisture Sensitivity Level (MSL)Number of TerminationsECCN CodeResistanceSubcategoryMax Power DissipationTechnologyTerminal PositionTerminal FormPeak Reflow Temperature (Cel)Number of FunctionsSupply VoltageTerminal PitchReflow Temperature-Max (s)Base Part NumberPin CountNumber of OutputsPower SuppliesNumber of ChannelsMax Supply VoltageMin Supply VoltageNominal Supply CurrentPower DissipationMax Supply CurrentTurn On Delay TimeSupply TypeTurn-Off Delay Time3db BandwidthOn-State Resistance (Max)Multiplexer/Demultiplexer CircuitOff-state Isolation-NomCurrent - Leakage (IS(off)) (Max)Channel Capacitance (CS(off), CD(off))On-state Resistance Match-NomSwitch CircuitSwitch Time (Ton, Toff) (Max)Charge InjectionChannel-to-Channel Matching (ΔRon)CrosstalkSwitchingSwitch-on Time-MaxVoltage - Supply, Single (V )LengthRadiation HardeningRoHS StatusLead FreeTerminal FinishReach Compliance CodeQualification StatusOperating Supply VoltageInterfaceTest FrequencyOperating Supply CurrentBandwidthInsertion Loss (dB)Normal PositionHeight Seated (Max)Analog IC - Other TypeSwitch-off Time-MaxThrow ConfigurationView Compare
-
ADG819BRMSurface Mount8-TSSOP, 8-MSOP (0.118, 3.00mm Width)YES8-40°C~125°C TATubee0noObsolete1 (Unlimited)8EAR99600mOhmMultiplexer or Switches5μWCMOSDUALGULL WING24013V0.65mm30ADG819823/5V15.5V1.8V2μA5μW2μA45 nsSingle16 ns17MHz600mOhm2:171 dB250pA80pF0.06OhmSPDT45ns, 16ns20pC60m Ω-72dB @ 100kHzBREAK-BEFORE-MAKE60ns1.8V~5.5V3mmNoNon-RoHS CompliantContains Lead---------------
-
Surface Mount10-TFSOP, 10-MSOP (0.118, 3.00mm Width)YES10-40°C~125°C TATape & Reel (TR)e0noObsolete1 (Unlimited)10EAR99650mOhmMultiplexer or Switches3.6μWCMOSDUALGULL WING24022.7V0.5mm30ADG8361043/3.3V23.6V1.65V-3.6μW1μA26 nsSingle7 ns-650mOhm2:167 dB1nA25pF0.04OhmSPDT26ns, 7ns40pC40m Ω-90dB @ 100kHzBREAK-BEFORE-MAKE-1.65V~3.6V3mm-Non-RoHS CompliantContains LeadTin/Lead (Sn/Pb)not_compliantNot Qualified3.6VParallel100kHz3nA57MHz0.05 dBNC1.1mm---
-
Surface Mount10-UFBGA, WLCSPYES10-40°C~85°C TATape & Reel (TR)e1noObsolete3 (168 Hours)10EAR99370mOhmMultiplexer or Switches5.5μWCMOSBOTTOMBALL26022.7V0.5mm40ADG884104-25.5V1.8V-5.5μW1μA50 nsSingle20 ns18MHz370mOhm2:160 dB200pA Typ103pF0.02OhmSPDT50ns, 20ns125pC10m Ω-120dB @ 100kHzBREAK-BEFORE-MAKE56ns1.8V~5.5V-NoROHS3 CompliantContains Lead----------0.63mmAUDIO/VIDEO SWITCH19ns-
-
Surface Mount8-TSSOP, 8-MSOP (0.118, 3.00mm Width)YES8-40°C~125°C TATape & Reel (TR)e0noObsolete1 (Unlimited)8EAR99300mOhmMultiplexer or Switches5μWCMOSDUALGULL WING24013V0.65mm30ADG8018-2/5V15.5V1.8V-5μW1μA45 nsSingle15 ns12MHz300mOhm1:161 dB250pA180pF 180pF-SPST - NO45ns, 15ns50pC--BREAK-BEFORE-MAKE55ns1.8V~5.5V3mmNoNon-RoHS CompliantContains LeadTin/Lead (Sn/Pb)--------NO---SPST
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
08 December 2023
NE556 Dual Bipolar Timer Features, Function, Structure, Working Principle, and Applications
Ⅰ. What is a timer?Ⅱ. Overview of NE556Ⅲ. What are the features of NE556 dual timer?Ⅳ. Pin configuration of NE556 dual timerⅤ. Function of NE556 dual timerⅥ. Structure... -
08 December 2023
AT89C51 Microcontroller Structure, Features, Function, AT89C51 vs AT89C52 and Applications
Ⅰ. What is AT89C51?Ⅱ. Pin configuration of AT89C51 microcontrollerⅢ. Structure of AT89C51 microcontrollerⅣ. What are the features of AT89C51 microcontroller?Ⅴ. Function of AT89C51 microcontrollerⅥ. Block diagram of AT89C51... -
11 December 2023
STM32F030F4P6 32-bit Microcontroller Features, Advantages and disadvantages, Dimension and Applications
Ⅰ. What is STM32F030F4P6?Ⅱ. Symbol, footprint and pin configuration of STM32F030F4P6 microcontrollerⅢ. What are the features of STM32F030F4P6 microcontroller?Ⅳ. Advantages and disadvantages of STM32F030F4P6 microcontrollerⅤ. Technical parameters of... -
11 December 2023
CR2032 vs CR2450: What is the Difference?
Ⅰ. What is a button battery?Ⅱ. CR2032 vs CR2450: OverviewⅢ. CR2032 vs CR2450: Symbol and footprintⅣ. CR2032 vs CR2450: FeaturesⅤ. CR2032 vs CR2450: Technical parametersⅥ. CR2450 vs CR2032:...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.