Analog Devices Inc. ADG811YRU-REEL7
- Part Number:
- ADG811YRU-REEL7
- Manufacturer:
- Analog Devices Inc.
- Ventron No:
- 3166415-ADG811YRU-REEL7
- Description:
- IC SWITCH QUAD SPST 16TSSOP
- Datasheet:
- ADG811-813
Analog Devices Inc. ADG811YRU-REEL7 technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. ADG811YRU-REEL7.
- Mounting TypeSurface Mount
- Package / Case16-TSSOP (0.173, 4.40mm Width)
- Surface MountYES
- Number of Pins16
- Operating Temperature-40°C~125°C TA
- PackagingTape & Reel (TR)
- JESD-609 Codee0
- Pbfree Codeno
- Part StatusObsolete
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations16
- ECCN CodeEAR99
- Resistance650mOhm
- Terminal FinishTin/Lead (Sn85Pb15)
- SubcategoryMultiplexer or Switches
- Max Power Dissipation14.4μW
- TechnologyCMOS
- Terminal PositionDUAL
- Terminal FormGULL WING
- Peak Reflow Temperature (Cel)240
- Number of Functions4
- Supply Voltage2.5V
- Terminal Pitch0.65mm
- Reflow Temperature-Max (s)30
- Base Part NumberADG811
- OutputSEPARATE OUTPUT
- Pin Count16
- Power Supplies1.8/3.3V
- Number of Channels4
- Max Supply Voltage3.6V
- Min Supply Voltage1.65V
- Power Dissipation14.4μW
- Max Supply Current4μA
- Throw ConfigurationSPST
- Turn On Delay Time25 ns
- Supply TypeSingle
- Turn-Off Delay Time5 ns
- 3db Bandwidth90MHz
- On-State Resistance (Max)650mOhm
- Multiplexer/Demultiplexer Circuit1:1
- Off-state Isolation-Nom67 dB
- Current - Leakage (IS(off)) (Max)1nA
- Channel Capacitance (CS(off), CD(off))30pF 35pF
- On-state Resistance Match-Nom0.04Ohm
- Switch CircuitSPST - NC
- Switch Time (Ton, Toff) (Max)25ns, 5ns
- Charge Injection30pC
- Channel-to-Channel Matching (ΔRon)40m Ω
- Crosstalk-90dB @ 100kHz
- SwitchingBREAK-BEFORE-MAKE
- Switch-on Time-Max30ns
- Switch-off Time-Max8ns
- Voltage - Supply, Single (V )1.65V~3.6V
- Normal PositionNC
- Height Seated (Max)1.2mm
- Length5mm
- Radiation HardeningNo
- RoHS StatusNon-RoHS Compliant
- Lead FreeContains Lead
ADG811YRU-REEL7 Overview
Surface Mount is a type of electronic component that is commonly used in modern circuit boards. In this particular case, the component has 16 terminations and a terminal pitch of 0.65mm. The pin count is also 16, indicating that it is a relatively small component. It requires power supplies of 1.8/3.3V to function properly. The turn-off delay time for this component is 5 ns, which means that it takes 5 nanoseconds to fully shut off after being triggered. The maximum on-state resistance is 650mOhm, and the switch time (Ton, Toff) is 25ns and 5ns respectively. The channel-to-channel matching, indicated by ΔRon, is 40m Ω. Finally, the normal position for this component is NC, which stands for normally closed.
ADG811YRU-REEL7 Features
4 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 90MHz
ADG811YRU-REEL7 Applications
There are a lot of Analog Devices Inc. ADG811YRU-REEL7 Analog Switches & Multiplexers ICs applications.
Cross Connects
High-Voltage
Optical Applications
MP3 players
Digital access cross connects
Routers
Voice over IP/DSL – Integrated Access Devices, Smart
PDAs
Avionics test equipment
Fiber In The Loop (FITL)
Surface Mount is a type of electronic component that is commonly used in modern circuit boards. In this particular case, the component has 16 terminations and a terminal pitch of 0.65mm. The pin count is also 16, indicating that it is a relatively small component. It requires power supplies of 1.8/3.3V to function properly. The turn-off delay time for this component is 5 ns, which means that it takes 5 nanoseconds to fully shut off after being triggered. The maximum on-state resistance is 650mOhm, and the switch time (Ton, Toff) is 25ns and 5ns respectively. The channel-to-channel matching, indicated by ΔRon, is 40m Ω. Finally, the normal position for this component is NC, which stands for normally closed.
ADG811YRU-REEL7 Features
4 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 90MHz
ADG811YRU-REEL7 Applications
There are a lot of Analog Devices Inc. ADG811YRU-REEL7 Analog Switches & Multiplexers ICs applications.
Cross Connects
High-Voltage
Optical Applications
MP3 players
Digital access cross connects
Routers
Voice over IP/DSL – Integrated Access Devices, Smart
PDAs
Avionics test equipment
Fiber In The Loop (FITL)
ADG811YRU-REEL7 More Descriptions
IC,ANALOG SWITCH,QUAD,SPST,CMOS,TSSOP,16PIN,PLASTIC
Analog Switch Quad SPST 16-Pin TSSOP T/R
Analog Switch ICs 500mOhm 3.6V CMOS Quad SPST
The ADG811/ADG812/ ADG813 are low voltage CMOS devices containing four independently selectable switches. These switches offer ultralow on resistance of less than 0.8 O over the full temperature range. The digital inputs can handle 1.8 V logic with a 2.7 V to 3.6 V supply. These devices contain four independent single-pole/single-throw (SPST) switches. The ADG811 and ADG812 differ only in that the digital control logic is inverted. The ADG811 switches are turned on with a logic low on the appropriate control input, while a logic high is required to turn on the switches of the ADG812. The ADG813 contains two switches whose digital control logic is similar to the ADG811, while the logic is inverted on the other two switches. Each switch conducts equally well in both directions when on and has an input signal range that extends to the supplies. The ADG813 exhibits break-before-make switching action. The ADG811/ADG812/ADG813 are fully specified for 3.3 V, 2.5 V, and 1.8 V supply operation. The ADG811 is available in a 16-lead TSSOP package and a 16-lead LFCSP package, and the ADG812/ADG813 are available in a 16-lead TSSOP package. Applications <0.8 O over full temperature range of -40°C to 125°C. Single 1.65 V to 3.6 V operation. Operational with 1.8 V CMOS logic. High current handling capability (300 mA continuous current at 3.3 V). Low THD N (0.02% typical). Small 3 mm × 3 mm LFCSP package and 16-lead TSSOP package. Applications Cellular phones MP3 players Power routing Battery-powered systems PCMCIA cards Modems Audio and video signal routing Communications systems
Analog Switch Quad SPST 16-Pin TSSOP T/R
Analog Switch ICs 500mOhm 3.6V CMOS Quad SPST
The ADG811/ADG812/ ADG813 are low voltage CMOS devices containing four independently selectable switches. These switches offer ultralow on resistance of less than 0.8 O over the full temperature range. The digital inputs can handle 1.8 V logic with a 2.7 V to 3.6 V supply. These devices contain four independent single-pole/single-throw (SPST) switches. The ADG811 and ADG812 differ only in that the digital control logic is inverted. The ADG811 switches are turned on with a logic low on the appropriate control input, while a logic high is required to turn on the switches of the ADG812. The ADG813 contains two switches whose digital control logic is similar to the ADG811, while the logic is inverted on the other two switches. Each switch conducts equally well in both directions when on and has an input signal range that extends to the supplies. The ADG813 exhibits break-before-make switching action. The ADG811/ADG812/ADG813 are fully specified for 3.3 V, 2.5 V, and 1.8 V supply operation. The ADG811 is available in a 16-lead TSSOP package and a 16-lead LFCSP package, and the ADG812/ADG813 are available in a 16-lead TSSOP package. Applications <0.8 O over full temperature range of -40°C to 125°C. Single 1.65 V to 3.6 V operation. Operational with 1.8 V CMOS logic. High current handling capability (300 mA continuous current at 3.3 V). Low THD N (0.02% typical). Small 3 mm × 3 mm LFCSP package and 16-lead TSSOP package. Applications Cellular phones MP3 players Power routing Battery-powered systems PCMCIA cards Modems Audio and video signal routing Communications systems
The three parts on the right have similar specifications to ADG811YRU-REEL7.
-
ImagePart NumberManufacturerMounting TypePackage / CaseSurface MountNumber of PinsOperating TemperaturePackagingJESD-609 CodePbfree CodePart StatusMoisture Sensitivity Level (MSL)Number of TerminationsECCN CodeResistanceTerminal FinishSubcategoryMax Power DissipationTechnologyTerminal PositionTerminal FormPeak Reflow Temperature (Cel)Number of FunctionsSupply VoltageTerminal PitchReflow Temperature-Max (s)Base Part NumberOutputPin CountPower SuppliesNumber of ChannelsMax Supply VoltageMin Supply VoltagePower DissipationMax Supply CurrentThrow ConfigurationTurn On Delay TimeSupply TypeTurn-Off Delay Time3db BandwidthOn-State Resistance (Max)Multiplexer/Demultiplexer CircuitOff-state Isolation-NomCurrent - Leakage (IS(off)) (Max)Channel Capacitance (CS(off), CD(off))On-state Resistance Match-NomSwitch CircuitSwitch Time (Ton, Toff) (Max)Charge InjectionChannel-to-Channel Matching (ΔRon)CrosstalkSwitchingSwitch-on Time-MaxSwitch-off Time-MaxVoltage - Supply, Single (V )Normal PositionHeight Seated (Max)LengthRadiation HardeningRoHS StatusLead FreeSupplier Device PackageNumber of CircuitsReach Compliance CodeNumber of OutputsQualification StatusOperating Supply VoltageInterfaceTest FrequencyOperating Supply CurrentBandwidthInsertion Loss (dB)Analog IC - Other TypeView Compare
-
ADG811YRU-REEL7Surface Mount16-TSSOP (0.173, 4.40mm Width)YES16-40°C~125°C TATape & Reel (TR)e0noObsolete1 (Unlimited)16EAR99650mOhmTin/Lead (Sn85Pb15)Multiplexer or Switches14.4μWCMOSDUALGULL WING24042.5V0.65mm30ADG811SEPARATE OUTPUT161.8/3.3V43.6V1.65V14.4μW4μASPST25 nsSingle5 ns90MHz650mOhm1:167 dB1nA30pF 35pF0.04OhmSPST - NC25ns, 5ns30pC40m Ω-90dB @ 100kHzBREAK-BEFORE-MAKE30ns8ns1.65V~3.6VNC1.2mm5mmNoNon-RoHS CompliantContains Lead-------------
-
Surface Mount8-TSSOP, 8-MSOP (0.118, 3.00mm Width)---40°C~125°C TATape & Reel (TR)--Obsolete1 (Unlimited)--------------ADG802------------12MHz300mOhm1:1-250pA180pF 180pF-SPST - NC45ns, 15ns50pC-----1.8V~5.5V----Non-RoHS Compliant-8-MSOP1----------
-
Surface Mount10-TFSOP, 10-MSOP (0.118, 3.00mm Width)YES10-40°C~125°C TATape & Reel (TR)e0noObsolete1 (Unlimited)10EAR99650mOhmTin/Lead (Sn/Pb)Multiplexer or Switches3.6μWCMOSDUALGULL WING24022.7V0.5mm30ADG836-103/3.3V23.6V1.65V3.6μW1μA-26 nsSingle7 ns-650mOhm2:167 dB1nA25pF0.04OhmSPDT26ns, 7ns40pC40m Ω-90dB @ 100kHzBREAK-BEFORE-MAKE--1.65V~3.6VNC1.1mm3mm-Non-RoHS CompliantContains Lead--not_compliant4Not Qualified3.6VParallel100kHz3nA57MHz0.05 dB-
-
Surface Mount10-UFBGA, WLCSPYES10-40°C~85°C TATape & Reel (TR)e1noObsolete3 (168 Hours)10EAR99370mOhm-Multiplexer or Switches5.5μWCMOSBOTTOMBALL26022.7V0.5mm40ADG884-10-25.5V1.8V5.5μW1μA-50 nsSingle20 ns18MHz370mOhm2:160 dB200pA Typ103pF0.02OhmSPDT50ns, 20ns125pC10m Ω-120dB @ 100kHzBREAK-BEFORE-MAKE56ns19ns1.8V~5.5V-0.63mm-NoROHS3 CompliantContains Lead---4-------AUDIO/VIDEO SWITCH
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
17 January 2024
MCF5282CVM66 Microcontroller Replacements, Structure, Working Principle and Other Details
Ⅰ. MCF5282CVM66 overviewⅡ. Structure and working principle of MCF5282CVM66Ⅲ. Specifications of MCF5282CVM66Ⅳ. What are the advantages and disadvantages of MCF5282CVM66?Ⅴ. Purpose of MCF5282CVM66Ⅵ. Market trend of MCF5282CVM66Ⅶ. Precautions... -
17 January 2024
DS18B20 Digital Temperature Sensor Structure, Features, Applications and More
Ⅰ. What is DS18B20?Ⅱ. Internal structure of DS18B20Ⅲ. Features of DS18B20 sensorⅣ. How does DS18B20 work?Ⅴ. Symbol, footprint and pin configuration of DS18B20Ⅵ. Driving principle of DS18B20Ⅶ. Where... -
18 January 2024
What is the BTN8982TA Bridge and How Does it Work?
Ⅰ. Introduction to BTN8982TAⅡ. Block diagram of BTN8982TAⅢ. Specifications of BTN8982TAⅣ. Working principle of BTN8982TAⅤ. BTN8982TA symbol, footprint and pin configurationⅥ. Features of BTN8982TAⅦ. Application fields of BTN8982TABTN8982TA... -
18 January 2024
TPS51200DRCR: Advanced Regulator Solution for DDR Termination
Ⅰ. Overview of TPS51200DRCRⅡ. Technical parameters of TPS51200DRCRⅢ. What are the advantages of TPS51200DRCR?Ⅳ. Absolute maximum ratings of TPS51200DRCRⅤ. How to use TPS51200DRCR?Ⅵ. Where is TPS51200DRCR used?Ⅶ. TPS51200DRCR...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.