Analog Devices Inc. ADG714BRUZ
- Part Number:
- ADG714BRUZ
- Manufacturer:
- Analog Devices Inc.
- Ventron No:
- 3165125-ADG714BRUZ
- Description:
- IC SWITCH OCTAL SPST 24TSSOP
- Datasheet:
- ADG714BRUZ
Analog Devices Inc. ADG714BRUZ technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. ADG714BRUZ.
- Factory Lead Time16 Weeks
- Lifecycle StatusPRODUCTION (Last Updated: 3 months ago)
- Contact PlatingTin
- Mounting TypeSurface Mount
- Package / Case24-TSSOP (0.173, 4.40mm Width)
- Surface MountYES
- Number of Pins24
- Operating Temperature-40°C~85°C TA
- PackagingTube
- JESD-609 Codee3
- Pbfree Codeno
- Part StatusActive
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations24
- ECCN CodeEAR99
- Resistance4.5Ohm
- Additional FeatureALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY
- SubcategoryMultiplexer or Switches
- Max Power Dissipation125μW
- TechnologyCMOS
- Terminal FormGULL WING
- Peak Reflow Temperature (Cel)260
- Number of Functions8
- Supply Voltage2.5V
- Terminal Pitch0.65mm
- Reflow Temperature-Max (s)40
- Base Part NumberADG714
- Pin Count24
- Power Supplies3/5/ -3V
- Number of Channels8
- InterfaceSerial
- Max Supply Voltage5.5V
- Min Supply Voltage2.7V
- Nominal Supply Current20μA
- Power Dissipation125μW
- Max Supply Current20μA
- Throw ConfigurationSPST
- Turn On Delay Time32 ns
- Voltage - Supply, Single/Dual (±)2.7V~5.5V ±2.5V
- Supply TypeDual, Single
- Bandwidth155MHz
- Neg Supply Voltage-Nom (Vsup)-2.5V
- Turn-Off Delay Time15 ns
- Max Dual Supply Voltage2.75V
- On-State Resistance (Max)4.5Ohm
- Min Dual Supply Voltage2.25V
- High Level Output Current30mA
- Dual Supply Voltage2.5V
- Multiplexer/Demultiplexer Circuit1:1
- Off-state Isolation-Nom60 dB
- Current - Leakage (IS(off)) (Max)100pA
- Channel Capacitance (CS(off), CD(off))11pF 11pF
- On-state Resistance Match-Nom0.4Ohm
- Switch CircuitSPST - NO
- Switch Time (Ton, Toff) (Max)20ns, 8ns (Typ)
- Charge Injection3pC
- Crosstalk-90dB @ 1MHz
- SwitchingBREAK-BEFORE-MAKE
- Drain to Source Resistance4.5Ohm
- Normal PositionNC
- Signal Current-Max0.1A
- Height1.05mm
- Length7.8mm
- Width4.4mm
- Radiation HardeningNo
- REACH SVHCNo SVHC
- RoHS StatusROHS3 Compliant
- Lead FreeContains Lead
ADG714BRUZ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 24-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tube. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Around -40°C~85°C TA is the extended operating temperature. In total, 24 terminations have occurred. The electronic part delivers high-quality output through its 8 channels. With a 2.5V voltage supply, the electrical component should be turned on and run. As part of its design, the 24 series is equipped with this electronic component. Circuits based on SPST - NO switching are used to construct these analog switch ics. Try searching with ADG714 to find analog multiplexer variants. There is 4.5Ohm internal resistance in this digital multiplexer. The datasheets for the 24 pins explain the functions. Theswitch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Dual, Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 2.7V. A digital multiplexer may suffer damage if voltage is applied above 20μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 2.75V. If you are using dual power supplies, you should attach at least 2.25V. It is possible to transfer data over a 155MHz-bandwidth. Additional features include: ALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY. It has a Drain to Source resistance of 4.5Ohm ohms.
ADG714BRUZ Features
8 Channels
Switch Circuit: SPST - NO
Bandwidth: 155MHz
Additional Features: ALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY
Drain-to-Source resistance: 4.5Ohm
ADG714BRUZ Applications
There are a lot of Analog Devices Inc. ADG714BRUZ Analog Switches & Multiplexers ICs applications.
Audio signal routing
DSLAMs
Multiplexers
Cell phones
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
Audio/video switches
Access Concentrators
PCMCIA cards
Microwave transmission systems
Communications systems
The electronic part can be shipped overseas conveniently because it is packaged in 24-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tube. It is mounted in the position Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Around -40°C~85°C TA is the extended operating temperature. In total, 24 terminations have occurred. The electronic part delivers high-quality output through its 8 channels. With a 2.5V voltage supply, the electrical component should be turned on and run. As part of its design, the 24 series is equipped with this electronic component. Circuits based on SPST - NO switching are used to construct these analog switch ics. Try searching with ADG714 to find analog multiplexer variants. There is 4.5Ohm internal resistance in this digital multiplexer. The datasheets for the 24 pins explain the functions. Theswitch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. Dual, Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 2.7V. A digital multiplexer may suffer damage if voltage is applied above 20μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 2.75V. If you are using dual power supplies, you should attach at least 2.25V. It is possible to transfer data over a 155MHz-bandwidth. Additional features include: ALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY. It has a Drain to Source resistance of 4.5Ohm ohms.
ADG714BRUZ Features
8 Channels
Switch Circuit: SPST - NO
Bandwidth: 155MHz
Additional Features: ALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLY
Drain-to-Source resistance: 4.5Ohm
ADG714BRUZ Applications
There are a lot of Analog Devices Inc. ADG714BRUZ Analog Switches & Multiplexers ICs applications.
Audio signal routing
DSLAMs
Multiplexers
Cell phones
Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
Audio/video switches
Access Concentrators
PCMCIA cards
Microwave transmission systems
Communications systems
ADG714BRUZ More Descriptions
8 4.5Ω SPST(SPST)-Normal Open TSSOP-24 Analog Switches / Multiplexers ROHS
CMOS, Low Voltage, SPI/QSPI/Microwire Compatible Interface, Serially Controlled, Octal SPST Switches
Analogue Switch, Octal Channel, Spst, 8, 2.5 Ohm, 2.7V To 5.5V, Tssop, 24 Rohs Compliant: Yes |Analog Devices ADG714BRUZ .
Analog Switch Octal SPST 24-Pin TSSOP Tube
ANALOGUE SWITCH, 8CH, SPST-NO, TSSOP;
Analog Switch ICs 2.5 Ohm 2.7V CMOS Octal SPST
IC SW SPST-NOX8 4.5OHM 24TSSOP
SPST, 8 Func, 1 Channel, CMOS, PDSO24
Analog Devices ADG714BRUZ ADG714BRUZ
CMOS, Low Voltage, SPI/QSPI/Microwire Compatible Interface, Serially Controlled, Octal SPST Switches
Analogue Switch, Octal Channel, Spst, 8, 2.5 Ohm, 2.7V To 5.5V, Tssop, 24 Rohs Compliant: Yes |Analog Devices ADG714BRUZ .
Analog Switch Octal SPST 24-Pin TSSOP Tube
ANALOGUE SWITCH, 8CH, SPST-NO, TSSOP;
Analog Switch ICs 2.5 Ohm 2.7V CMOS Octal SPST
IC SW SPST-NOX8 4.5OHM 24TSSOP
SPST, 8 Func, 1 Channel, CMOS, PDSO24
Analog Devices ADG714BRUZ ADG714BRUZ
The three parts on the right have similar specifications to ADG714BRUZ.
-
ImagePart NumberManufacturerFactory Lead TimeLifecycle StatusContact PlatingMounting TypePackage / CaseSurface MountNumber of PinsOperating TemperaturePackagingJESD-609 CodePbfree CodePart StatusMoisture Sensitivity Level (MSL)Number of TerminationsECCN CodeResistanceAdditional FeatureSubcategoryMax Power DissipationTechnologyTerminal FormPeak Reflow Temperature (Cel)Number of FunctionsSupply VoltageTerminal PitchReflow Temperature-Max (s)Base Part NumberPin CountPower SuppliesNumber of ChannelsInterfaceMax Supply VoltageMin Supply VoltageNominal Supply CurrentPower DissipationMax Supply CurrentThrow ConfigurationTurn On Delay TimeVoltage - Supply, Single/Dual (±)Supply TypeBandwidthNeg Supply Voltage-Nom (Vsup)Turn-Off Delay TimeMax Dual Supply VoltageOn-State Resistance (Max)Min Dual Supply VoltageHigh Level Output CurrentDual Supply VoltageMultiplexer/Demultiplexer CircuitOff-state Isolation-NomCurrent - Leakage (IS(off)) (Max)Channel Capacitance (CS(off), CD(off))On-state Resistance Match-NomSwitch CircuitSwitch Time (Ton, Toff) (Max)Charge InjectionCrosstalkSwitchingDrain to Source ResistanceNormal PositionSignal Current-MaxHeightLengthWidthRadiation HardeningREACH SVHCRoHS StatusLead FreeMountTerminal FinishTerminal PositionReach Compliance CodeOutputQualification StatusSwitch-on Time-MaxSwitch-off Time-MaxVoltage - Supply, Single (V )Height Seated (Max)3db BandwidthView Compare
-
ADG714BRUZ16 WeeksPRODUCTION (Last Updated: 3 months ago)TinSurface Mount24-TSSOP (0.173, 4.40mm Width)YES24-40°C~85°C TATubee3noActive1 (Unlimited)24EAR994.5OhmALSO OPERATES WITH 2.7V TO 5.5V SINGLE SUPPLYMultiplexer or Switches125μWCMOSGULL WING26082.5V0.65mm40ADG714243/5/ -3V8Serial5.5V2.7V20μA125μW20μASPST32 ns2.7V~5.5V ±2.5VDual, Single155MHz-2.5V15 ns2.75V4.5Ohm2.25V30mA2.5V1:160 dB100pA11pF 11pF0.4OhmSPST - NO20ns, 8ns (Typ)3pC-90dB @ 1MHzBREAK-BEFORE-MAKE4.5OhmNC0.1A1.05mm7.8mm4.4mmNoNo SVHCROHS3 CompliantContains Lead------------
-
---Surface Mount16-SOIC (0.154, 3.90mm Width)-16-40°C~85°C TATubee0noObsolete1 (Unlimited)16EAR994OhmCAN ALSO OPERATE WITH 5 V SUPPLYMultiplexer or Switches5μWCMOSGULL WING24043V1.27mm20ADG711163/5V4Parallel5.5V1.8V-5μW1μASPST11 ns--200MHz-6 ns-4Ohm---1:158 dB100pA10pF 10pF0.1OhmSPST - NC11ns, 6ns (Typ)3pC-90dB @ 10MHzBREAK-BEFORE-MAKE-NC--9.9mm---Non-RoHS CompliantContains LeadSurface MountTin/Lead (Sn85Pb15)DUALnot_compliantSEPARATE OUTPUTNot Qualified20ns12ns1.8V~5.5V1.75mm-
-
---Surface Mount8-TSSOP, 8-MSOP (0.118, 3.00mm Width)YES8-40°C~85°C TATape & Reel (TR)e0noObsolete1 (Unlimited)8EAR993Ohm-Multiplexer or Switches5μWCMOSGULL WING24013V0.65mm-ADG70183/5V1-5.5V1.8V-5μW1μASPST12 ns----8 ns-3Ohm---1:155 dB250pA17pF 17pF1.5OhmSPST - NO12ns, 8ns (Typ)5pC-BREAK-BEFORE-MAKE-NC--3mm-No-ROHS3 CompliantContains Lead--DUAL-SEPARATE OUTPUT-20ns-1.8V~5V-200MHz
-
---Surface Mount8-TSSOP, 8-MSOP (0.118, 3.00mm Width)YES8-40°C~85°C TATape & Reel (TR)e3yesObsolete1 (Unlimited)8EAR993Ohm-Multiplexer or Switches5μWCMOSGULL WING26013V0.65mmNOT SPECIFIEDADG70283/5V1-5.5V1.8V-5μW1pASPST12 ns----8 ns-3Ohm---1:155 dB250pA17pF 17pF1.5OhmSPST - NC12ns, 8ns (Typ)5pC-BREAK-BEFORE-MAKE-NO--3mm---ROHS3 CompliantContains Lead-Matte Tin (Sn)DUALunknownSEPARATE OUTPUTNot Qualified20ns-1.8V~5V-200MHz
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
07 September 2023
TPC8129 Internal Circuit, Specifications, Application and Marking
Ⅰ. Overview of TPC8129TPC8129 is a product of Toshiba, a Japanese comprehensive electronic and electrical company. It is a chip for LED driver circuits and is mainly used... -
12 September 2023
The Difference Between L293D and L298N
In this article we will explore the main differences between the L293D and L298N motor drivers. Both motor drives have their own unique features and applications. Understanding the... -
12 September 2023
Comprehensive Analysis of CR123A battery: Features, Applications and Purchase
Ⅰ. CR123A overviewThe CR123A battery, classified under the non-rechargeable (primary) category, is a high-performance power source with distinct specifications. Featuring a robust lithium manganese composition, it boasts a... -
13 September 2023
AT89S52-24PU Microcontroller Equivalent, Features and Working Principle
Ⅰ. AT89S52-24PU overviewAT89S52 is a low-voltage, high-performance 8-bit CMOS microcontroller with 8K bytes of in-circuit programmable flash memory (ISP). AT89S52 is a high-density non-volatile memory compatible with the...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.