AD8552ARU-REEL

Analog Devices Inc. AD8552ARU-REEL

Part Number:
AD8552ARU-REEL
Manufacturer:
Analog Devices Inc.
Ventron No:
3190261-AD8552ARU-REEL
Description:
IC OPAMP CHOPPER 1.5MHZ 8TSSOP
ECAD Model:
Datasheet:
AD8552ARU-REEL

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
Analog Devices Inc. AD8552ARU-REEL technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. AD8552ARU-REEL.
  • Mounting Type
    Surface Mount
  • Package / Case
    8-TSSOP (0.173, 4.40mm Width)
  • Surface Mount
    YES
  • Operating Temperature
    -40°C~125°C
  • Packaging
    Tape & Reel (TR)
  • JESD-609 Code
    e0
  • Pbfree Code
    no
  • Part Status
    Obsolete
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    8
  • Terminal Finish
    TIN LEAD
  • Subcategory
    Operational Amplifier
  • Technology
    CMOS
  • Terminal Position
    DUAL
  • Terminal Form
    GULL WING
  • Peak Reflow Temperature (Cel)
    240
  • Number of Functions
    2
  • Supply Voltage
    5V
  • Terminal Pitch
    0.65mm
  • Reach Compliance Code
    unknown
  • Time@Peak Reflow Temperature-Max (s)
    30
  • Pin Count
    8
  • JESD-30 Code
    R-PDSO-G8
  • Output Type
    Rail-to-Rail
  • Number of Circuits
    2
  • Current - Supply
    850μA
  • Slew Rate
    0.4V/μs
  • Amplifier Type
    Zero-Drift
  • Common Mode Rejection Ratio
    130 dB
  • Current - Input Bias
    10pA
  • Voltage - Supply, Single/Dual (±)
    2.7V~5.5V
  • Gain Bandwidth Product
    1.5MHz
  • Unity Gain BW-Nom
    1500 kHz
  • Average Bias Current-Max (IIB)
    0.004μA
  • Supply Voltage Limit-Max
    6V
  • Voltage - Input Offset
    1μV
  • Current - Output / Channel
    30mA
  • Length
    4.4mm
  • RoHS Status
    Non-RoHS Compliant
Description
AD8552ARU-REEL Overview
In the package, you will find a 8-TSSOP (0.173, 4.40mm Width)-case to contain the op amp ic. The instrumentation amplifier in this picture is of the Zero-Drift-type. A Tape & Reel (TR) case is used for delivering the op amp. During the past two weeks, there have been close to 8 terminations. A total of 8 pins are located on this board. This linear amplifier should be powered by an 5V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. For this electrical component, Surface Mount is the recommended mounting type. According to the manufacturer, this buffer op amp works well at -40°C~125°C , which is a good operating temperature. A instrumentation amplifier like this has 2 circuits. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. There is a recommendation that this electrical part be used with a supply with 850μA current rating.

AD8552ARU-REEL Features
8 Pins
supply voltage of 5V
Output Type: Rail-to-Rail


AD8552ARU-REEL Applications
There are a lot of Rochester Electronics, LLC
AD8552ARU-REEL Instrumentational OP Amps applications.


Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation
Video computer boards
AD8552ARU-REEL More Descriptions
SP Amp Zero Drift Amplifier Dual R-R I/O 5V 8-Pin TSSOP T/R
Operational Amplifier, 2 Func, 10uV Offset-Max, CMOS, PDSO8
This family of amplifiers has ultralow offset, drift, and bias current. The AD8551, AD8552, and AD8554 are single, dual, and quad amplifiers featuring rail-to-rail input and output swings. All are guaranteed to operate from 2.7 V to 5 V with a single supply. The AD855x family provides the benefits previously found only in expensive auto-zeroing or chopper-stabilized amplifiers. Using Analog Devices, Inc. topology, these new zero-drift amplifiers combine low cost with high accuracy. No external capacitors are required. With an offset voltage of only 1 µV and drift of 0.005 µV/°C, the AD855x are perfectly suited for applications in which error sources cannot be tolerated. Temperature, position and pressure sensors, medical equipment, and strain gage amplifiers benefit greatly from nearly zero drift over their operating temperature range. The rail-to-rail input and output swings provided by the AD855x family make both high-side and low-side sensing easy. The AD855x family is specified for the extended industrial/auto motive temperature range (-40°C to 125°C). The AD8551 single amplifier is available in 8-lead MSOP and 8-lead narrow SOIC packages. The AD8552 dual amplifier is available in 8-lead narrow SOIC and 8-lead TSSOP surface-mount packages. The AD8554 quad is available in 14-lead narrow SOIC and 14-lead TSSOP packages. Applications Temperature sensors Pressure sensors Precision current sensing Strain gage amplifiers Medical instrumentation Thermocouple amplifiers
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.