Analog Devices Inc. AD7893ARZ-2

AD7893ARZ-2 Overview
The manufacturer of this component is Analog Devices Inc. It is a chip used for data acquisition, specifically for converting analog signals to digital signals. This chip falls under the category of Data Acquisition - Analog to Digital Converters (ADC). The contact plating on the chip is made of tin. The maximum power that can be dissipated by the chip is 45mW. The polarity of the chip is unipolar, meaning it only has one positive and one negative pole. The maximum supply voltage that can be applied to the chip is 5.25V. It is a single supply type, meaning it only requires one power supply. The data interface used is SPI (Serial Peripheral Interface). The power consumption of the chip is 25mW. The signal to noise ratio (SNR) of the chip is 70 dB, meaning the signal is 70 times stronger than any background noise. The maximum conversion time for the chip is 6μs (microseconds). The height of the chip is 1.75mm.

AD7893ARZ-2 Features
1 Functions
8 basic kinds of terminations
8 pin count
Minimal supply voltage of 4.75V
5V power supplies

AD7893ARZ-2 Applications
There are a lot of Analog Devices Inc. AD7893ARZ-2 ADC applications.

Telecommunications
Industrial Process Control
Broadband data applications
GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
Wireless and wired broadband communications
Micro and pico cell systems, software radios
Data Acquisition Systems
4-channel data acquisition
Rotary encoder
Communication test equipment