Analog Devices Inc. AD5304BRM-REEL
- Part Number:
- AD5304BRM-REEL
- Manufacturer:
- Analog Devices Inc.
- Ventron No:
- 3628137-AD5304BRM-REEL
- Description:
- IC DAC 8BIT QUAD VOUT 10-MSOP
- Datasheet:
- AD5304BRM-REEL
Analog Devices Inc. AD5304BRM-REEL technical specifications, attributes, parameters and parts with similar specifications to Analog Devices Inc. AD5304BRM-REEL.
- MountSurface Mount
- Mounting TypeSurface Mount
- Package / Case10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
- Number of Pins10
- Operating Temperature-40°C~105°C
- PackagingTape & Reel (TR)
- JESD-609 Codee0
- Part StatusObsolete
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations10
- ECCN CodeEAR99
- SubcategoryOther Converters
- TechnologyCMOS
- Terminal PositionDUAL
- Terminal FormGULL WING
- Peak Reflow Temperature (Cel)240
- Number of Functions1
- Supply Voltage3V
- Terminal Pitch0.5mm
- Reflow Temperature-Max (s)30
- Base Part NumberAD5304
- Pin Count10
- Output TypeVoltage - Buffered
- Power Supplies3/5V
- InterfaceSPI, Serial
- Max Supply Voltage5.5V
- Min Supply Voltage2.5V
- Number of Bits8
- Supply Current-Max0.9mA
- ArchitectureString DAC
- Converter TypeD/A CONVERTER
- Reference TypeExternal
- Data InterfaceSPI, DSP
- Differential OutputNo
- Resolution1 B
- Voltage - Supply, Analog2.5V~5.5V
- Voltage - Supply, Digital2.5V~5.5V
- Settling Time8μs
- Integral Nonlinearity (INL)0.625 LSB
- Input Bit CodeBINARY
- Conversion Rate167 ksps
- INL/DNL (LSB)±0.15, ±0.02
- Number of D/A Converters4
- Analog Output Voltage-Min0.001V
- Height Seated (Max)1.1mm
- Length3mm
- Width3mm
- RoHS StatusNon-RoHS Compliant
AD5304BRM-REEL Overview
This package is included in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package and is available for purchase. Power is provided by a 3V-volt supply. An FPGA part from the Other Converters family. The Surface Mount-slot on the development board allows you to attach the FPGA module. It is recommended that the operating temperature be kept within the range -40°C~105°C while the machine is operating. It is designed to maximiTape & Reel (TR)e space efficiency by containing the FPGA model in Tape & Reel (TR). There are a total of 10 terminations. In order to find related parts, you can use its base part number AD5304. It has a total of 10 pins that are designed for it. Providing the FPGA is mounted in Surface Mount as per the specifications of the IC, then it should work perfectly according to its specifications. It operates from a 3/5V power supply. I am going to present you with a device that is equipped with 10 pins. This device is capable of supporting a maximum supply voltage of 5.5V. As long as the supply voltage is at least 2.5V, it is able to work properly.
AD5304BRM-REEL Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
10 pin count
10 pins
AD5304BRM-REEL Applications
There are a lot of Analog Devices Inc. AD5304BRM-REEL Digital to Analog Converters (DAC)?applications.
Precision AGC Circuits
Digital Radio Link
Process Control and Industrial Automation
Level Setting
Industrial Process Control
Microprocessor Controlled Circuits
Instrumentation
Software Radio
Function Generators
Microprocessor Controlled Calibration
This package is included in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package and is available for purchase. Power is provided by a 3V-volt supply. An FPGA part from the Other Converters family. The Surface Mount-slot on the development board allows you to attach the FPGA module. It is recommended that the operating temperature be kept within the range -40°C~105°C while the machine is operating. It is designed to maximiTape & Reel (TR)e space efficiency by containing the FPGA model in Tape & Reel (TR). There are a total of 10 terminations. In order to find related parts, you can use its base part number AD5304. It has a total of 10 pins that are designed for it. Providing the FPGA is mounted in Surface Mount as per the specifications of the IC, then it should work perfectly according to its specifications. It operates from a 3/5V power supply. I am going to present you with a device that is equipped with 10 pins. This device is capable of supporting a maximum supply voltage of 5.5V. As long as the supply voltage is at least 2.5V, it is able to work properly.
AD5304BRM-REEL Features
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package
10 pin count
10 pins
AD5304BRM-REEL Applications
There are a lot of Analog Devices Inc. AD5304BRM-REEL Digital to Analog Converters (DAC)?applications.
Precision AGC Circuits
Digital Radio Link
Process Control and Industrial Automation
Level Setting
Industrial Process Control
Microprocessor Controlled Circuits
Instrumentation
Software Radio
Function Generators
Microprocessor Controlled Calibration
AD5304BRM-REEL More Descriptions
DAC 4-CH Resistor-String 8-bit 10-Pin MSOP T/R
IC DAC 8BIT QUAD VOUT 10-MSOP
IC DAC 8BIT V-OUT 10MSOP
The AD5304/AD5314/AD5324 are quad 8-, 10-, and 12-bit buffered voltage output DACs in 10-lead MSOP and 10-lead LFCSP packages that operate from a single 2.5 V to 5.5 V supply, consuming 500 µA at 3 V. Their on-chip output amplifiers allow rail-to-rail output swing to be achieved with a slew rate of 0.7 V/µs. A 3-wire serial interface is used; it operates at clock rates up to 30 MHz and is compatible with standard SPI, QSPI, MICROWIRE, and DSP interface standards. The references for the four DACs are derived from one reference pin. The outputs of all DACs can be updated simultaneously using the software LDAC function. The parts incorporate a power-on reset circuit, and ensure that the DAC outputs power up to 0 V and remains there until a valid write takes place to the device. The parts contain a power-down feature that reduces the current consumption of the device to 200 nA @ 5 V (80 nA @ 3 V). The low power consumption of these parts in normal operation makes them ideally suited to portable battery-operated equipment. The power consumption is 3 mW at 5 V, 1.5 mW at 3 V, reducing to 1 µW in power-down mode. Applications Portable battery-powered instruments Digital gain and offset adjustment Programmable voltage and current sources Programmable attenuators Industrial process control
IC DAC 8BIT QUAD VOUT 10-MSOP
IC DAC 8BIT V-OUT 10MSOP
The AD5304/AD5314/AD5324 are quad 8-, 10-, and 12-bit buffered voltage output DACs in 10-lead MSOP and 10-lead LFCSP packages that operate from a single 2.5 V to 5.5 V supply, consuming 500 µA at 3 V. Their on-chip output amplifiers allow rail-to-rail output swing to be achieved with a slew rate of 0.7 V/µs. A 3-wire serial interface is used; it operates at clock rates up to 30 MHz and is compatible with standard SPI, QSPI, MICROWIRE, and DSP interface standards. The references for the four DACs are derived from one reference pin. The outputs of all DACs can be updated simultaneously using the software LDAC function. The parts incorporate a power-on reset circuit, and ensure that the DAC outputs power up to 0 V and remains there until a valid write takes place to the device. The parts contain a power-down feature that reduces the current consumption of the device to 200 nA @ 5 V (80 nA @ 3 V). The low power consumption of these parts in normal operation makes them ideally suited to portable battery-operated equipment. The power consumption is 3 mW at 5 V, 1.5 mW at 3 V, reducing to 1 µW in power-down mode. Applications Portable battery-powered instruments Digital gain and offset adjustment Programmable voltage and current sources Programmable attenuators Industrial process control
The three parts on the right have similar specifications to AD5304BRM-REEL.
-
ImagePart NumberManufacturerMountMounting TypePackage / CaseNumber of PinsOperating TemperaturePackagingJESD-609 CodePart StatusMoisture Sensitivity Level (MSL)Number of TerminationsECCN CodeSubcategoryTechnologyTerminal PositionTerminal FormPeak Reflow Temperature (Cel)Number of FunctionsSupply VoltageTerminal PitchReflow Temperature-Max (s)Base Part NumberPin CountOutput TypePower SuppliesInterfaceMax Supply VoltageMin Supply VoltageNumber of BitsSupply Current-MaxArchitectureConverter TypeReference TypeData InterfaceDifferential OutputResolutionVoltage - Supply, AnalogVoltage - Supply, DigitalSettling TimeIntegral Nonlinearity (INL)Input Bit CodeConversion RateINL/DNL (LSB)Number of D/A ConvertersAnalog Output Voltage-MinHeight Seated (Max)LengthWidthRoHS StatusContact PlatingSurface MountPbfree CodeMax Power DissipationPolarityPower DissipationMax Output VoltageMin Input VoltageSlew RateMax Input VoltageSupply TypeSampling RateMin Output VoltageLinearity Error-Max (EL)Number of ConvertersLead FreeMax Operating TemperatureMin Operating TemperatureTemperature GradeNumber of ChannelsAnalog Output Voltage-MaxInput FormatView Compare
-
AD5304BRM-REELSurface MountSurface Mount10-TFSOP, 10-MSOP (0.118, 3.00mm Width)10-40°C~105°CTape & Reel (TR)e0Obsolete1 (Unlimited)10EAR99Other ConvertersCMOSDUALGULL WING24013V0.5mm30AD530410Voltage - Buffered3/5VSPI, Serial5.5V2.5V80.9mAString DACD/A CONVERTERExternalSPI, DSPNo1 B2.5V~5.5V2.5V~5.5V8μs0.625 LSBBINARY167 ksps±0.15, ±0.0240.001V1.1mm3mm3mmNon-RoHS Compliant-----------------------
-
-Surface MountSOT-23-66-40°C~105°CTape & Reel (TR)e0Obsolete1 (Unlimited)6EAR99Other ConvertersCMOSDUALGULL WING24013V0.95mm30AD53106Voltage - Buffered3/5VSPI, Serial5.5V2.7V100.25mAString DACD/A CONVERTERSupplySPI, DSPNo1.25 B2.7V~5.5V2.7V~5.5V8μs4 LSBBINARY167 ksps±4 (Max), ±0.5 (Max)---2.9mm-Non-RoHS CompliantLead, TinYESno1.25mWUnipolar1.25mW5.5V2.7V1 V/μs5.5VSingle167 ksps2.7V0.39%1Contains Lead------
-
Surface MountSurface MountSOT-23-66-Cut Tape (CT)e0Obsolete1 (Unlimited)6EAR99Other ConvertersCMOSDUALGULL WING-13V0.95mm-AD53016Voltage3/5V2-Wire, I2C, Serial5.5V2.5V80.25mA-D/A CONVERTER--No1 B--8 μs1 LSBBINARY167 ksps----2.9mm-Non-RoHS Compliant--yes-------------105°C-40°CINDUSTRIAL15.499V-
-
-Surface MountSOT-23-66-40°C~105°CTape & Reel (TR)e0Obsolete1 (Unlimited)6EAR99Other ConvertersCMOSDUALGULL WING22013V0.95mm30AD53106Voltage - Buffered3/5VSPI--100.25mAString DACD/A CONVERTERSupplySPI, DSPNo1.25 B2.7V~5.5V2.7V~5.5V8μs4 LSBBINARY167 ksps±4 (Max), ±0.5 (Max)1--2.9mm-Non-RoHS Compliant-YESno----------0.39%------5.5VSERIAL
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
25 March 2024
USB3300-EZK Manufacturer, Pinout, Features and Application
Ⅰ. USB3300-EZK descriptionⅡ. Manufacturer of USB3300-EZKⅢ. Pin diagram of USB3300-EZKⅣ. Technical parameters of USB3300-EZKⅤ. Application of USB3300-EZKⅥ. Functional features of USB3300-EZKⅦ. How does USB3300-EZK support OTG protocol?Ⅰ. USB3300-EZK... -
26 March 2024
Everything You Need to Know About the TL431 Voltage Regulator
Ⅰ. What is TL431 regulator?Ⅱ. Main features of TL431Ⅲ. TL431 ratingsⅣ. How to measure the quality of TL431?Ⅴ. What can it be used for?Ⅵ. How to distinguish the... -
26 March 2024
A Complete Guide to the TB6600HG
Ⅰ. TB6600HG descriptionⅡ. Specifications of TB6600HGⅢ. Operating conditions of TB6600HGⅣ. How to connect TB6600HG to the control system?Ⅴ. TB6600HG product featuresⅥ. Pin configuration of TB6600HGⅦ. Function description of... -
27 March 2024
LM358P Op-Amp: Characteristics, Package, Layout, Uses and More
Ⅰ. LM358P descriptionⅡ. Characteristics of LM358PⅢ. Package design of LM358PⅣ. Layout of LM358PⅤ. LM358P usesⅥ. LM358P circuitⅦ. Can LM358 and LM358P be replaced?Ⅷ. How to use LM358P correctly...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.