Texas Instruments 5962-9321801QSA
- Part Number:
- 5962-9321801QSA
- Manufacturer:
- Texas Instruments
- Ventron No:
- 6387637-5962-9321801QSA
- Description:
- Octal Transparent D-type Latches With 3-State Outputs
- Datasheet:
- sn54abt373
- Number of channels8
- Technology familyABT
- Supply voltage (min) (V)4.5
- Supply voltage (max) (V)5.5
- Input typeTTL-Compatible CMOS
- Output type3-State
- Clock frequency (max) (MHz)150
- IOL (max) (mA)64
- IOH (max) (mA)-32
- Supply current (max) (μA)30000
- FeaturesPartial power down (Ioff)
- Operating temperature range (°C)-55 to 125
- RatingMilitary
The eight latches of the 'ABT373 are transparent D-type latches. While the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the logic levels set up at the D inputs.
A buffered output-enable (OE\) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without need for interface or pullup components.
OE\ does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
The SN54ABT373 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74ABT373 is characterized for operation from -40°C to 85°C.
Latch Transparent 3-ST 8-CH D-Type 20-Pin CFPAK Tube
Octal Transparent Latch with TRI-STATE Outputs
ABT SERIES 8-BIT DRIVER TRUE OUTPUT CDFP20
Latest News
-
18 March 2024
TDA7377 Audio Power Amplifier Alternatives, Application and Other Details
Ⅰ. Overview of TDA7377Ⅱ. Performance evaluation of TDA7377Ⅲ. Internal circuit diagram of TDA7377Ⅳ. Application of TDA7377Ⅴ. PCB-layout grounding of TDA7377Ⅵ. TDA7377 power amplifier chip parametersⅦ. How to ensure... -
19 March 2024
HT1621B Alternatives, Brand, Usage and Other Details
Ⅰ. Overview of HT1621BⅡ. Which brand is HT1621B?Ⅲ. Pins and description of HT1621BⅣ. How to use HT1621B?Ⅴ. Application circuits of HT1621BⅥ. Tips for using HT1621BⅦ. How to set... -
19 March 2024
AT24C02 Pinout, Working Principle, Characteristics and More
Ⅰ. AT24C02 overviewⅡ. Working principle of AT24C02Ⅲ. Pins and functions of AT24C02Ⅳ. Characteristics of AT24C02Ⅴ. Block diagram of AT24C02Ⅵ. What should we pay attention to when using AT24C02?Ⅶ.... -
20 March 2024
L9110S Advantages, Pinout, Working Principle and Application
Ⅰ. L9110S overviewⅡ. Advantages of L9110SⅢ. L9110S pin configurationⅣ. Hardware introduction of L9110S motor drive moduleⅤ. Working principle of L9110S motor drive moduleⅥ. L9110S application circuitⅦ. How to...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.