Maxim Integrated DS1231-20N

DS1231-20N Overview
There are 8 terminals on this power management that allow it to be mounted. A Tube package is used to package the power management. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find 8-DIP (0.300, 7.62mm) functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. There is a specification for the peak reflow temperature of the package to be 260. In a 5V supply voltage, the power management conducts. In a 1 supply voltage, the PMIC chip conducts. Through Hole mounts IC management. In total, it has 8 pins on IC management. There are 8 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 4.5V for this PMIC. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Through Hole is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. There is a supply current of 500μA for the power management. You can always use DS1231, the base supervisor number, to search for similar PMICs of the manufacturer. At the most, voltage supervisor can work with a supply temperature of 2mA.

DS1231-20N Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
500μA operating supply current


DS1231-20N Applications
There are a lot of Maxim Integrated
DS1231-20N Voltage Supervisors applications.


Power distribution systems of infant care room
Power distribution systems of ICU
Power distribution systems of CCU
emergency room
Medical-specific isolation transformer
Medical-specific insulation monitor
Transformer load monitoring equipment
External alarm
Display equipment
DC stabilized power supply module