Intersil X9C102SIZT2

Description
The X9C102, X9C103, X9C104, and X9C503 are digitally controlled potentiometers (XDCPs) from Intersil. They consist of a resistor array, wiper switches, a control section, and non-volatile memory. The wiper position is controlled by a three-wire interface.
The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs.
The position of the wiper can be stored in non-volatile memory and then be recalled upon a subsequent power-up operation.

Features
Solid-state potentiometer
Three-wire serial interface
100 wiper tap points
Wiper position stored in non-volatile memory and recalled on power-up
99 resistive elements
Temperature compensated
End-to-end resistance, ±20%
Terminal voltages, 5V
Low power CMOS
Voc -5V
Active current, 3mA max.
Standby current, 750µA max.
High reliability
Endurance, 100,000 data changes per bit
Register data retention, 100 years
Pb-Free Available (RoHS Compliant)
Packages
8 LD SOIC
8 Ld PDIP

Applications
The device can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications ranging from control to signal processing to parameter adjustment.