Vishay Semiconductor Opto Division VBPW34S

VBPW34S Overview
These photodiodes are packaged in the Digi-Reel® to protect them from damage. The photodiodes are put into 2-SMD, Gull Wing packages for safety protection. The voltage for the photodiodes should not exceed 60V in reverse-bias mode on a continual basis. The photodiodes have 2 pins. The photodiodes could release 215mW heat within a circuit. The reverse anode voltage for the photodiodes should be 60V. In general, the maximum heat released by the photodiodes should be 215mW in a circuit. In the DC circuit, the photodiodes can work properly with the reverse voltage of 60V. The voltage needed to get current to flow across a photodiode should be 1.3V. The breakdown voltage should be 60V to ensure photodiodes work. Even in the absence of light input, a photodiode occurs 2nA current.

VBPW34S Features
Moisture Sensitivity Level (MSL): 3 (168 Hours)
Operating Temperature: -40°C~100°C
Packaging: Digi-Reel®
Diode Type: PIN
Mount: PCB, Surface Mount
Spectral Range: 430nm ~ 1100nm
Viewing Angle: 130°


VBPW34S Applications
There are a lot of Vishay Semiconductor Opto Division
VBPW34S Photodiodes applications.


High speed photo detector
Infrared remote control
Infrared data transmission
Photo interrupters
Shaft encoders
Electronic Equipment
Industrial Automation
Machine Controls
Light Barriers
Vision Controls