Texas Instruments UCC28501DW

UCC28501DW Overview
A 20-SOIC (0.295, 7.50mm Width) package contains it.As you can see, it's packaged in a Tube-shape.The device's mounting type is Surface Mount.With 9.7V~18V as the voltage supply, it should work.-40°C~85°C is the operating frequency of the device.As well as the POWER FACTOR CONTROLLER WITH POST REGULATOR integrated circuit, this part contains other types of integrated circuits as well.The gadget has several 20 terminals.150μA represents the startup current.This component retains the pin number at 20 even though the pin number has been changed.UCC28501 is the device's best feature.There is a switching frequency of 80kHz~120kHz.The 20 pins are summed up.With a minimum input voltage of 10.3V, it is capable of functioning.I suppose it can be considered a subclass of Switching Regulator or Controllers.The input voltage of the device (Max) is 15V.With a frequency of 200kHz, it will continue to function with a good degree of accuracy for a long time to come.The maximum output current it can deliver is 1.2AA 12V volt supply is always used to power the component.Isup, the maximum supply current, shall not exceed 4mA.In addition to the features mentioned above, CAN ALSO BE PROGRAMMED FOR CURRENT MODE AND VOLTAGE MODE is another one that is worth mentioning.

UCC28501DW Features

UCC28501DW Applications
There are a lot of Texas Instruments UCC28501DW PFC PMICs applications.

Gateway module
Fans
SCP configurator
DVD and CD-ROM drive
Arduino servo control
CPU power supply
Low-voltage microprocessor power supplies
CAV (Connected and Automated Vehicle)
VCO (Voltage-Controlled Oscillator)
High output current applications