Texas Instruments TXS0104ENMNR

Name: TXS0104ENMNR
Brand: Texas Instruments
SKU: 6410455-TXS0104ENMNR
Availability: InStock
Rating: 5 (1 reviews)

Part Number:: TXS0104ENMNR

Manufacturer:: Texas Instruments

Ventron No:: 6410455-TXS0104ENMNR

Description:: 4-Bit Bidirectional Voltage-Level Shifter for Open-Drain and Push-Pull Applications

ECAD Model:

Datasheet:: txs0104e

Specifications

Texas Instruments TXS0104ENMNR technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments TXS0104ENMNR.

Technology family
TXS
Applications
SPIO
Bits (#)
4
Data rate (max) (MBits)
24
High input voltage (min) (V)
1.45
High input voltage (max) (V)
5.5
Vout (min) (V)
1.65
Vout (max) (V)
5.5
IOH (max) (mA)
0
IOL (max) (mA)
0
Supply current (max) (μA)
10
Features
Edge rate accelerator
Input type
Transmission Gate
Output type
3-State
Rating
Catalog
Operating temperature range (°C)
-40 to 85

Description

This 4-bit non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track V_CCA. V_CCA accepts any supply voltage from 1.65 V to 3.6 V. V_CCA must be less than or equal to V_CCB. The B port is designed to track V_CCB. V_CCB accepts any supply voltage from 2.3 V to 5.5 V. This allows for low-voltage bidirectional translation between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes.

When the output-enable (OE) input is low, all outputs are placed in the high-impedance state.

The TXS0104E is designed so that the OE input circuit is supplied by V_CCA.

To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

Certification