Texas Instruments TLV2763IDGSR

Name: TLV2763IDGSR
Brand: Texas Instruments
SKU: 3691958-TLV2763IDGSR
Availability: InStock
Rating: 5 (1 reviews)

Part Number:: TLV2763IDGSR

Manufacturer:: Texas Instruments

Ventron No:: 3691958-TLV2763IDGSR

Description:: Dual, 3.6-V, 500-kHz, RRIO operational amplifier with shutdown

ECAD Model:

Datasheet:: tlv2763

Specifications

Texas Instruments TLV2763IDGSR technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments TLV2763IDGSR.

Number of channels
2
Total supply voltage ( 5 V = 5
±5 V = 10) (min) (V)
Rail-to-rail
In
GBW (typ) (MHz)
0.5
Slew rate (typ) (V/μs)
0.22
Vos (offset voltage at 25°C) (max) (mV)
3.5
Iq per channel (typ) (mA)
0.02
Vn at 1 kHz (typ) (nV√Hz)
95
Rating
Catalog
Operating temperature range (°C)
-40 to 85
Offset drift (typ) (V/°C)
0.000009
Features
Shutdown
Input bias current (max) (pA)
15
CMRR (typ) (dB)
76
Iout (typ) (A)
0.007
Architecture
CMOS
Input common mode headroom (to negative supply) (typ) (V)
-0.2
Input common mode headroom (to positive supply) (typ) (V)
0.2
Output swing headroom (to negative supply) (typ) (V)
0.05
Output swing headroom (to positive supply) (typ) (V)
-0.01

Description

The TLV276x single supply operational amplifiers provide 500 kHz bandwidth from only 20 µA while operating down to 1.8 V over the industrial temperature range. The maximum recommended supply voltage is 3.6 V, which allows the devices to be operated from (.1.8 V supplies down to .0.9 V) two AA or AAA cells. The devices have been characterized at 1.8 V (end of life of 2 AA(A) cells) and at 2.4 V (nominal voltage of 2 NiCd/NiMH cells). The TLV276x have rail-to-rail input and output capability which is a necessity at 1.8 V.

The low supply current is coupled with extremely low input bias currents enabling them to be used with mega-ohm resistors. Low shutdown current of only 10 nA make these devices ideal for low frequency measurement applications desiring long active battery life.

All members are available in PDIP and SOIC with the singles in the small SOT-23 package, duals in the MSOP, and quads in the TSSOP package.

TLV2763IDGSR More Descriptions

Dual, 3.6-V, 500-kHz, RRIO operational amplifier with shutdown 10-VSSOP -40 to 85
IC OPAMP GP 500KHZ RRO 10VSSOP / Op Amp Dual Low Power Amplifier R-R I/O ¡À1.8V/3.6V 10-Pin VSSOP T/R
General Purpose Amplifier 2 Circuit Rail-to-Rail 10-VSSOP
Operational Amplifiers - Op Amps Dual 1.8-V Micropwr R-to-R Single Sply
Operational Amplifier (Op-Amp) IC; No. of Amplifiers:2; Op Amp Type:Low Power; Gain Bandwidth -3db:0.5MHz; Slew Rate:0.2V/µs; Supply Voltage Min:1.8V; Supply Voltage Max:3.6V; No. of Pins:10 ;RoHS Compliant: Yes

Certification