Texas Instruments TLC556MJB

Part Number:
Texas Instruments
Ventron No:
Low-Power Dual LinCMOS? Timer
ECAD Model:

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Texas Instruments TLC556MJB technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments TLC556MJB.
  • Function
    General-purpose timer
  • Iq (typ) (mA)
  • Rating
  • Operating temperature range (°C)
    -55 to 125
  • Supply voltage (max) (V)
  • Supply voltage (min) (V)

The TLC556 series are monolithic timing circuits fabricated using the TI LinCMOSTM process, which provides full compatibility with CMOS, TTL, and MOS logic and operates at frequencies up to 2MHz. Accurate time delays and oscillations are possible with smaller, less-expensive timing capacitors than the NE556 because of the high input impedance. Power consumption is low across the full range of power supply voltages.

Like the NE556, the TLC556 has a trigger level approximately one-third of the supply voltage and

a threshold level approximately two-thirds of the supply voltage. These levels can be altered by use of the control voltage terminal. When the trigger input falls below the trigger level, the flip-flop is set and the output goes high. If the trigger input is above the trigger level and the threshold input is above the threshold level, the flip-flop is reset and the output is low. The reset input can override all other inputs and can be used to initiate a new timing cycle. If the reset input is low, the flip-flop is reset and the output is low. Whenever the output is low, a low-impedance path is provided between the discharge terminal and ground.

While the CMOS output is capable of sinking over 100 mA and sourcing over 10 mA, the TLC556 exhibits greatly reduced supply-current spikes during output transitions. This minimizes the need for the large decoupling capacitors required by the NE556.

These devices have internal electrostatic-discharge (ESD) protection circuits that prevent catastrophic failures at voltages up to 2000 V as tested under MIL-STD-883C, Method 3015. However, care should be exercised in handling these devices, as exposure to ESD may result in degradation of the device parametric performance.

All unused inputs should be tied to an appropriate logic level to prevent false triggering.

The TLC556C is characterized for operation from 0°C to 70°C. The TLC556I is characterized for operation from -40°C to 85°C. The TLC556M is characterized for operation over the full military temperature range of -55°C to 125°C

TLC556MJB More Descriptions
Low-Power Dual LinCMOS™ Timer 14-CDIP -55 to 125
French Electronic Distributor since 1988
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • 09 April 2024

    INA826AIDR Layout and Selection Guide

    Ⅰ. Description of INA826AIDRⅡ. Pin configuration and functionsⅢ. Functional features of INA826AIDRⅣ. What impact does external resistance have on the stability of INA826AIDR?Ⅴ. Schematic diagram and working principle...
  • 10 April 2024

    LM2904DT Dual Operational Amplifier: Features, Package and Specifications

    Ⅰ. Overview of LM2904DTⅡ. Electrical characteristic curvesⅢ. Features of LM2904DTⅣ. Package of LM2904DTⅤ. Supply voltage and current requirements of LM2904DTⅥ. Specifications of LM2904DTⅦ. How to use LM2904DT in...
  • 10 April 2024

    STM32F103CBT6 Microcontroller Features, Application and STM32F103CBT6 vs CKS32F103C8T6

    Ⅰ. Description of STM32F103CBT6Ⅱ. Low-power modes of STM32F103CBT6Ⅲ. Functional features of STM32F103CBT6Ⅳ. Application fields of STM32F103CBT6Ⅴ. GPIO attributes and configuration process of STM32F103CBT6Ⅵ. How to program and debug...
  • 11 April 2024

    A Complete Guide to IR2104 Half-Bridge Driver

    Ⅰ. IR2104 descriptionⅡ. IR2104 half-bridge driver circuit characteristicsⅢ. IR2104 half-bridge driver working principleⅣ. Practical application of IR2104Ⅴ. Recommended operating conditions of IR2104Ⅵ. What are the heat dissipation measures...
  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.