Texas Instruments TLC3702CDR

TLC3702CDR Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has an output type of CMOS, Push-Pull, TTL .This package has been designed with Tape & Reel (TR) .The comparator has a total of 8 terminals.Electronic comparator is a part of Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .It's a typical General Purpose comparator.The pinout of the component starts from 8 pins it has.A Surface Mount mounting type is recommended.In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .This comparator has 8 pins.In case you are looking for more pin-to-pin solutions, you may want to search TLC3702 .As a result, this comparator displays a quiescent current of 50μA .The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current be 40μA in order to use the device normally.If the current supply exceeds 20μA , the comparator could malfunction.5V power supplies are enough to run the device.Input current to the device is limited to 5pA .The part is from LinCMOS? comparator series.For normal operation, there should be 5V operating supply voltage applied.With a TR package, this device is designed for general use (usually in ADC circuits).

TLC3702CDR Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 50μA

TLC3702CDR Applications
There are a lot of Texas Instruments TLC3702CDR linear comparators applications.

Window Comparators
Battery-Powered Electronics
Handheld Instruments
DC/DC and AC/DC power supplies
Multivibrators and High-Voltage Digital Logic Gates
General Purpose Low Voltage Applications
Infotainment & cluster
General-Purpose Portable Devices
Consumer Medical Electronics
Zero-Crossing Detectors