Microchip Technology TCN75-3.3MUA713

Ic,temperature Sensor,tssop,8Pin,plastic Rohs Compliant: Yes |Microchip TCN75-3.3MUA713
TC75 Series 5.5 V 2-Wire Serial Temperature Sensor - MSOP-8
2-Wire Serial Temp Sensor/Thermal Monitor8 MSOP 3x3mm T/R | Microchip Technology Inc. TCN75-3.3MUA713
Temp Sensor Digital Serial (2-Wire, I2C) 8-Pin MSOP T/R
Serial (Digital) Output, 2.7 to 5.5V, MSOP-8, RoHSMicrochip SCT
Temp Sensors - Serial Input/Output - Thermal Monitors 2-Wire
2-Wire Serial Temp Sensor/Thermal Monitor
SENSOR DIGITAL -55C-125C 8MSOP
The TCN75 is a serially programmable temperature sensor that notifies the host controller when ambient temperature exceeds a user programmed set point. Hysteresis is also programmable. The INT/CMPTR output is programmable as either a simple comparator for thermostat operation or as a temperature event interrupt. Communication with the TCN75 is accomplished via a two-wire bus that is compatible with industry standard protocols. This permits reading the current temperature, programming the set point and hysteresis, and configuring the device. The TCN75 powers up in Comparator mode with adefault set point of 80oC with 5oC hysteresis. Defaults allow independent operation as a stand-alone thermostat. A shutdown command may be sent via the 2-wire bus to activate the low-power Standby mode. Address selection inputs allow up to eight TCN75s to share the same 2-wire bus for multi zone monitoring. All registers can be read by the host and the INT/CMPTR output's polarity is user programmable. Both polled and interrupt driven systems are easily accommodated. Small physical size, low installed cost, and ease-of-use make the TCN75 an ideal choice for implementing sophisticated system management schemes.