Texas Instruments SN74HCT273DWR

SN74HCT273DWR Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). As part of the package Cut Tape (CT), it is embedded. This output is configured with Non-Inverted. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. It is operating at a temperature of -40°C~85°C TA. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74HCT series. In order for it to function properly, its output frequency should not exceed 37MHz. D latch consists of 1 elements. Terminations are 20. JK flip flop belongs to 74HCT273 family. A voltage of 5V is used as the power supply for this D latch. A 3pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as HCT. A part of the electronic system is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. There is a clock edge trigger type of Positive Edgeon this device. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with a number of bits of 8. To achieve this superior flexibility, 8 circuits are used. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. A power supply of 5Vis required to operate it. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. With an output current of 4mA, this device offers maximum design flexibility. 3input lines are available for you to choose from. As a result, it consumes 8μA of quiescent current without being affected by external factors.

SN74HCT273DWR Features
Cut Tape (CT) package
74HCT series
20 pins
8 Bits
5V power supplies

SN74HCT273DWR Applications
There are a lot of Texas Instruments SN74HCT273DWR Flip Flops applications.

Individual Asynchronous Resets
Bus hold
Computers
Circuit Design
ESD performance
CMOS Process
Bounce elimination switch
Power down protection
Instrumentation
Data Synchronizers