Texas Instruments SN74HCT08DR

SN74HCT08DR Overview
The part comes in 14-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Cut Tape (CT). A AND Gate logic principle is used to make it work. The part must have a voltage of 4.5V~5.5V in order to function properly. Operation at a temperature around -40°C~85°C. In Surface Mount, the part is mounted. There is 4mA 4mA output current in the high or low states. It comes from the 74HCT series. A total of 14 terminations have been recorded. Users will benefit significantly from 4 functions in this part. There is a chip in this package that is a part of HCT. Try searching with 74HCT08 if you're looking for device variants. 14 pins are injected into the part body. It is widely used in a variety of applications due to its Surface Mount mounting. The functions of 14 pins can be found in the datasheets. The part supports 2 inputs. It has 2μA current flowing through it when it is quiescent. There is Gates logic device like this in the world. The part bears a load capacitance of 50pF. There is a method TR in it that is designed for the industry. This part requires 5V power supplies, according to its datasheet. There is 25mA output current rated for the device. There are 1 outputs on the device. The total number of elements used for operation is 4. In the specification of the chip, it is specified that the operating supply voltage will be 5V volts.

SN74HCT08DR Features
AND Gate Logic Type
Operating Temperature: -40°C~85°C
HCT Family
Quiescent Current: 2μA
Output Current: 25mA

SN74HCT08DR Applications
There are a lot of Texas Instruments SN74HCT08DR Gates and Inverters applications.

Mobile caravan
Washing machine
Residual current/leakage current protection
Troubleshooting & Judgment
Electric grinding wheel
Overcurrent/Short circuit protection
Small ground power station
Communication
Scanner
Electricity for military and civilian life in areas without electricity