Texas Instruments SN74HC273N

SN74HC273N Overview
It is embeded in 20-DIP (0.300, 7.62mm) case. The Tubepackage contains it. In the configuration, Non-Invertedis used as the output. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Through Hole. The JK flip flop operates at 2V~6Vvolts. Temperature is set to -40°C~85°C TA. A flip flop of this type is classified as a D-Type. It is a type of FPGA belonging to the 74HC series. A frequency of 60MHzshould not be exceeded by its output. A total of 1elements are present in it. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The object belongs to the 74HC273 family. It is powered by a voltage of 5V . JK flip flop input capacitance is 3pF farads. It belongs to the family of electronic devices known as HC/UH. The electronic part is mounted in the way of Through Hole. As you can see from the design, it has pins with 20. In this device, the clock edge trigger type is Positive Edge. It is included in FF/Latches. This flip flop is designed with 8 Bits. The maximal supply voltage (Vsup) reaches 6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. In order to achieve high efficiency, the supply voltage should be maintained at 5V. This T flip flop features a maximum design flexibility due to its output current of 5.2mA. As of now, there are 2input lines. 8μAquiescent current consumed. Additionally, it is characterized by DUMMY VAL. Currently, there are 8 channels available.

SN74HC273N Features
Tube package
74HC series
20 pins
8 Bits

SN74HC273N Applications
There are a lot of Texas Instruments SN74HC273N Flip Flops applications.

Asynchronous counter
Frequency Dividers
Balanced Propagation Delays
Control circuits
Event Detectors
Count Modes
Frequency Divider circuits
Frequency division
Pattern generators
Modulo – n – counter