Texas Instruments SN74AHCT574N

SN74AHCT574N Overview
20-DIP (0.300, 7.62mm)is the packaging method. It is contained within the Tubepackage. Tri-State, Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. Through Holeis positioned in the way of this electronic part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at -40°C~125°C TA. D-Typeis the type of this D latch. FPGAs belonging to the 74AHCTseries contain this type of chip. There should be no greater frequency than 115MHzon its output. In total, it contains 1 elements. As a result, it consumes 4μA of quiescent current without being affected by external factors. It has been determined that there have been 20 terminations. The 74AHCT574 family contains this object. Power is provided by a 5V supply. The input capacitance of this JK flip flopis 3pF farads. It belongs to the family of electronic devices known as AHCT/VHCT/VT. A part of the electronic system is mounted in the way of Through Hole. There are 20pins on it. It has a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. Flip flops designed with 8bits are used in this part. A total of 5V power supplies are needed to run it. The D flip flop has no ports embedded. Optimal efficiency requires a supply voltage of 5V. As a result of its output current of 8mA, it is very flexible in terms of design. A total of 3input lines have been provided. The number of channels is growing strong/weak: 8.

SN74AHCT574N Features
Tube package
74AHCT series
20 pins
8 Bits
5V power supplies

SN74AHCT574N Applications
There are a lot of Texas Instruments SN74AHCT574N Flip Flops applications.

QML qualified product
Balanced 24 mA output drivers
Computing
Digital electronics systems
Data transfer
Asynchronous counter
Supports Live Insertion
Count Modes
Latch
Balanced Propagation Delays