Texas Instruments SN74ACT74D

SN74ACT74D Overview
The flip flop is packaged in 14-SOIC (0.154, 3.90mm Width). The Tubepackage contains it. In the configuration, Differentialis used as the output. There is a trigger configured with Positive Edge. Surface Mountmounts this electrical part. With a supply voltage of 4.5V~5.5V volts, it operates. Currently, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. FPGAs belonging to the 74ACTseries contain this type of chip. Its output frequency should not exceed 210MHz. A total of 14 terminations have been made. Members of the 74ACT74family make up this object. The power source is powered by 5V. This T flip flop has a capacitance of 3pF farads at the input. It is a member of the ACTfamily of D flip flop. This electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. A Positive Edgeclock edge trigger is used in this device. It is included in FF/Latches. The superior flexibility of this circuit is achieved by using 2 circuits. The D latch operates on 5V volts. The supply voltage should be maintained at 5V for high efficiency. As a result of its output current of 24mA, it is very flexible in terms of design. There are 4 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. This D latch consumes 2μA quiescent current at all.

SN74ACT74D Features
Tube package
74ACT series
14 pins
5V power supplies

SN74ACT74D Applications
There are a lot of Texas Instruments SN74ACT74D Flip Flops applications.

Convert a momentary switch to a toggle switch
Bounce elimination switch
Communications
Digital electronics systems
ESD performance
Asynchronous counter
Data Synchronizers
Bus hold
Buffer registers
CMOS Process