Texas Instruments SN65LVDS105D

SN65LVDS105D Overview
Packaging is convenient because power buffer comes in 16-SOIC (0.154, 3.90mm Width).Packaged in Tube and ready for power buffer.Surface Mount Universal mout to make it easier for you to adjust.Speaking of types, this is a typical Buffer, Multiplexer.For this op amp buffer to function, it requires 3V~3.6V voltage.For the output quality to be maintained, 1 x 1:4 channels work together.As a result of this, there is no input facilitation.As a precaution, it is recommended that you set the operating temperature to -40°C~85°C in order to avoid malfunctioning.To get more pin-to-pin solutions for your special needs, try searching a higher letter such as "65LVDS105" instead of "s".There is a 16 terminal on the op amp buffer, which can be seen in the picture below.During reflow, the peak temperature of the material is determined by the number 260.As long as the splitter is supplied with 3.3V voltage, it can perform a wide range of demanding tasks.The pinout of the power buffer starts from 16 pins it has.LVDS is the output format.16 pins are included in it.In addition to the Surface Mount axis, it has a female hole for mounting to PCBs or other boards.In the industry, other Line Driver or Receiverss play an important role, such as the power buffer.In order for this power buffer to operate, a voltage of 23mA must be applied.It is necessary to provide 3.3V operating supply voltage for normal operation.Using a 1-Bit receiver, it transmits and receives data.Power dissipation is 950mW at most for this splitter.Splitters should be powered by 23mA-volts under normal conditions.The overall number of outputs supported is 4.

SN65LVDS105D Features
1 x 1:4 channels.
A standard Line Driver or Receivers.
1-Bit receiver.
4 outputs.

SN65LVDS105D Applications
There are a lot of Texas Instruments SN65LVDS105D Signal Buffers, Repeaters, Splitters applications.

Clock Distribution
Industrial PCs
Network Switches/Routers
Desktop Computers
Communications Switchers
Protection Switching
Servers
Network Switches/Routers
Add/Drop Muxes
Backplane Interconnect