Texas Instruments SN65LVDS104PW

SN65LVDS104PW Overview
The package is packed in 16-TSSOP (0.173, 4.40mm Width) for convenient transportation of power buffer.Currently available in Tube packages for power buffer.An easy-to-adjust universal mout.On the topic of types, I would like to point out that this is a typical Buffer, Multiplexer.The op amp buffer works at 3V~3.6V voltage.To maintain quality, 1 x 1:4 channels work together.Hence, it facilitates the entry of LVDS into the system.If you want to avoid malfunctions, you need to set the operating temperature to -40°C~85°C.Try search with "65LVDS104" to get more pin-to-pin solutions for your special needs.An op amp buffer with 16 terminals can be found.There is a maximum reflow temperature of 260 for the op amp buffers.The splitter is supplied with 3.3V voltage, so it is capable of completing a wide range of demanding tasks.Power buffer pinouts start from 16 pins.There are 16 pins on the op amp buffers.This board has a Surface Mount hole for mounting on a PCB or other board.Other Line Driver or Receivers like the power buffer play a important role in the industry.There is a voltage of 23mA which is used to power this power buffer.The voltage required for normal operation is 3.3V.Using a 1-Bit receiver, it transmits and receives data.At most, this splitter dissipates 774mW watts of power.For normal use of the splitter, the nominal supply current should be 23mA.The spliter supports a total of 4 outputs.

SN65LVDS104PW Features
1 x 1:4 channels.
A standard Line Driver or Receivers.
1-Bit receiver.
4 outputs.

SN65LVDS104PW Applications
There are a lot of Texas Instruments SN65LVDS104PW Signal Buffers, Repeaters, Splitters applications.

Protection Switching
Portable IPC/HMI
Industrial Server
Digital Cross-Connects
SATA SSDs or HDDs
Backplane Interconnect
DSLAMs
Servers
Digital Crossconnects
Industrial/Embedded PC