Texas Instruments SN65LVDS100DG4

SN65LVDS100DG4 Overview
As a convenience to the user, power buffer has been packaged in 8-SOIC (0.154, 3.90mm Width).Currently, this power buffer is ready to ship in Tube packages.An easy-to-adjust universal mout is included with the Surface Mount.The type Buffer, ReDriver is typical.There is 3V~3.6V voltage used by this op amp buffer.As a result, CML, LVDS, LVPECL input is facilitated.A -40°C~85°C should be set as the operating temperature in order to avoid malfunctions.To find pin-to-pin solutions that fit your specific requirements, try searching with the letter "65LVDS100".8 terminals are on the op amp buffer.The peak reflow temperature of it is 260.It is capable of completing a wide range of tasks with the 3.3V voltage supplied.From the 8 pins on the Power buffer, we can see the pinout of the Power buffer.A LVDS value is output by the program.It is equipped with 8 pins.It has a Surface Mount for mouting on PCB or other boards.The power buffer and other Line Driver or Receivers play an important role in the industry.30mA is the voltage at which this power buffer operates.For normal operation, 3.3V voltage is required.1-Bit receiver is used.The splitter dissipates at most 481mW watts.1 elements are used to interface with this repeater signal.There should be a 12μA output from the spliter at the moment.

SN65LVDS100DG4 Features
A standard Line Driver or Receivers.
1-Bit receiver.

SN65LVDS100DG4 Applications
There are a lot of Texas Instruments SN65LVDS100DG4 Signal Buffers, Repeaters, Splitters applications.

PECL-to-LVDS Translation
Test Equipment
Portable IPC/HMI
SATA SSDs or HDDs
Cable Repeaters
Network Switches/Routers
Multidrop Buses
Network Switches/Routers
Digital Crossconnects
Protection Switching