Texas Instruments REG101NA-3.3/250

REG101NA-3.3/250 Overview
This Voltage Regulator IC comes inCut Tape (CT) packaging. Packaging of the Liner regulator IC takes the form of a SC-74A, SOT-753 case. The PMIC chip has 5 terminations. In this case, Fixed represents the output type of the Voltage Regulated IC. A total of 1 regulators are implemented in this eletric component. Surface Mount can be adjusted in the Linear IC in order to vary the temperature range over which Linear Regulator operates. Keeping the temperature at -40°C~85°C degrees is necessary for this regulator to function. It is configured for output function Positive on this regulator. In total, this chip consists of 5 pins and is divided into two groups. The part includes 1 outputs in order to ensure that the voltage regulator IC performs effectively and in a timely manner. There is a dropout voltage of 10 volts on this IC regulator. The component's pin number remains 5. It is REG101 for this regulator, just for your information. This regulator IC is a typical Other Regulators. There is a way of packing the regulator that is called TR. Upon reaching its maximal output current, 100mA, it is able to satisfy the operation requirements. It operates in the 400μA Quiescent Current state. The IC voltage regulator can work with a supply voltage of 10V volts at top.

REG101NA-3.3/250 Features
60mV dropout voltage
Other Regulators subtageroy
TR method of packing

REG101NA-3.3/250 Applications
There are a lot of Texas Instruments REG101NA-3.3/250 Linear Voltage Regulators applications.

HVAC (Heating, Ventilation, and Air Conditioning)
Vibration sensor
LCD backlight
Gateway module
Electronic modules
Battery-powered device
Decoupling circuit
PLL (Phase-Locked Loop)
TVS diodes
Power tool motor control