PI49FCT3805AHE
Share:

Diodes Incorporated PI49FCT3805AHE

Part Number:
PI49FCT3805AHE
Manufacturer:
Diodes Incorporated
Ventron No:
2974699-PI49FCT3805AHE
Description:
IC CLK BUFFER 1:5 66MHZ 20SSOP
ECAD Model:
Datasheet:
PI49FCT3805, PI49FCT3806
Payment:
Payment
Delivery:
Delivery

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Part Overview
Description
P149FCT3805: 3.3V noninverting clock driver
P149FCT3806: 3.3V inverting clock driver
Two independent groups of buffers with 3state Output Enable inputs (active LOW)
1in, 5out configuration per group
Two banks of drivers, driving five outputs each from a standard TTL compatible CMOS input

Features
Extremely low output skew: 0.5ns
Monitor output pin
Clock busing with 3state control
TTL input and CMOS output compatible
Industrial operation at 40°C to 85°C
Extremely low static power (1mW typ.)
Hysteresis on all inputs
Specifications
Diodes Incorporated PI49FCT3805AHE technical specifications, attributes, parameters and parts with similar specifications to Diodes Incorporated PI49FCT3805AHE.
  • Factory Lead Time
    6 Weeks
  • Mount
    Surface Mount
  • Mounting Type

    Mounting Type refers to the method by which an electronic component is attached to a printed circuit board (PCB) or other surface. Common mounting types include: * Through-hole: Component leads are inserted into holes in the PCB and soldered on the other side. * Surface-mount: Component is placed on the surface of the PCB and soldered in place. * Press-fit: Component is pressed into place on the PCB without soldering. * Socket: Component is inserted into a socket on the PCB, allowing for easy replacement. The mounting type is determined by factors such as the component's size, shape, and power requirements.

    Surface Mount
  • Package / Case

    Package / Case refers to the physical housing or enclosure that encapsulates an electronic component. It provides protection, facilitates handling, and enables electrical connections. The package type determines the component's size, shape, pin configuration, and mounting options. Common package types include DIP (dual in-line package), SOIC (small outline integrated circuit), and BGA (ball grid array). The package also influences the component's thermal and electrical performance.

    20-SSOP (0.209, 5.30mm Width)
  • Number of Pins

    Number of Pins: Indicates the number of electrical connections available on the component. These pins are used to connect the component to other components or circuits on a printed circuit board (PCB). The number of pins determines the functionality and connectivity options of the component. It is important to ensure that the component has the correct number of pins for the intended application.

    20
  • Operating Temperature

    Operating Temperature is the range of temperatures at which an electronic component can function properly. It is typically specified in degrees Celsius (°C) and indicates the minimum and maximum temperatures at which the component can operate without experiencing damage or degradation. Operating Temperature is an important parameter to consider when designing electronic circuits, as it ensures that the components will function reliably in the intended operating environment.

    -40°C~85°C
  • Packaging
    Tube
  • Series

    Series, in the context of electronic components, refers to the arrangement of components in a circuit. When components are connected in series, they form a single path for current to flow through. The total resistance of a series circuit is the sum of the individual resistances of each component. Series connections are often used to control the flow of current in a circuit, as the total resistance can be adjusted by changing the number or type of components in the series.

    49FCT
  • JESD-609 Code
    e3
  • Part Status

    Part Status is an electronic component parameter that indicates the availability and production status of a component. It is typically used to inform customers about the availability of a component, whether it is in production, end-of-life, or obsolete. Part Status can also provide information about any restrictions or limitations on the component's use, such as whether it is only available for certain applications or if it has been discontinued.

    Obsolete
  • Moisture Sensitivity Level (MSL)

    Moisture Sensitivity Level (MSL) is a measure of the susceptibility of a surface mount electronic component to moisture-induced damage during soldering. It is classified into six levels, from 1 (least sensitive) to 6 (most sensitive). MSL is determined by the materials used in the component's construction, including the solderability of its terminals and the presence of moisture-absorbing materials. Components with higher MSL ratings require more stringent handling and storage conditions to prevent moisture absorption and subsequent damage during soldering.

    1 (Unlimited)
  • Number of Terminations
    20
  • ECCN Code
    EAR99
  • Terminal Finish
    Matte Tin (Sn)
  • Subcategory
    Clock Drivers
  • Max Power Dissipation
    500mW
  • Voltage - Supply
    3V~3.6V
  • Terminal Position
    DUAL
  • Terminal Form
    GULL WING
  • Peak Reflow Temperature (Cel)
    260
  • Number of Functions
    2
  • Supply Voltage

    Supply Voltage is the voltage required to power an electronic component. It is typically measured in volts (V) and is specified in the component's datasheet. The supply voltage must be within the specified range for the component to function properly. If the supply voltage is too low, the component may not function at all. If the supply voltage is too high, the component may be damaged.

    3.3V
  • Terminal Pitch
    0.65mm
  • Reflow Temperature-Max (s)
    40
  • Base Part Number
    49FCT3805
  • Output
    CMOS
  • Number of Outputs

    Number of Outputs refers to the number of independent output signals or channels that an electronic component can provide. It indicates the capability of the component to drive multiple external devices or circuits simultaneously. A higher number of outputs allows for greater flexibility and connectivity in electronic systems.

    10
  • Operating Supply Voltage
    3.3V
  • Supply Voltage-Max (Vsup)
    3.6V
  • Supply Voltage-Min (Vsup)
    3V
  • Number of Circuits

    Number of Circuits refers to the number of independent signal paths within an electronic component. It indicates how many separate circuits or channels the component can handle simultaneously. For example, an operational amplifier with a Number of Circuits of 2 can amplify two separate input signals independently. This parameter is crucial for determining the component's functionality and its suitability for specific applications.

    2
  • Load Capacitance

    Load Capacitance (CL) is a parameter that specifies the maximum capacitance that can be connected to the output of an electronic component without affecting its performance. It is typically measured in picofarads (pF) or nanofarads (nF). A high load capacitance can cause the output voltage to drop or the output current to increase, which can lead to instability or damage to the component.

    50pF
  • Power Dissipation

    Power Dissipation is the maximum amount of power that an electronic component can safely dissipate without being damaged. It is typically measured in watts (W) and is determined by the component's physical size, material properties, and design. Exceeding the power dissipation rating can lead to overheating, reduced performance, and even component failure.

    500mW
  • Propagation Delay
    5.8 ns
  • Quiescent Current

    Quiescent current is the amount of current drawn by an electronic component when it is not actively performing its intended function. It is typically measured in milliamps (mA) or microamps (µA). Quiescent current is important because it can affect the overall power consumption of a circuit, especially in battery-powered devices. Components with high quiescent current can drain batteries more quickly than those with low quiescent current.

    30μA
  • Turn On Delay Time
    8 ns
  • Frequency (Max)
    66MHz
  • Family
    FCT
  • Logic Function
    Buffer
  • Input
    CMOS, TTL
  • Ratio - Input:Output
    1:5
  • Differential - Input:Output
    No/No
  • Same Edge Skew-Max (tskwd)
    0.7 ns
  • Width
    5.3mm
  • Radiation Hardening
    No
  • RoHS Status
    ROHS3 Compliant
  • Lead Free
    Lead Free
Product Comparison
The three parts on the right have similar specifications to PI49FCT3805AHE.
  • Image
    Part Number
    Manufacturer
    Factory Lead Time
    Mount
    Mounting Type
    Package / Case
    Number of Pins
    Operating Temperature
    Packaging
    Series
    JESD-609 Code
    Part Status
    Moisture Sensitivity Level (MSL)
    Number of Terminations
    ECCN Code
    Terminal Finish
    Subcategory
    Max Power Dissipation
    Voltage - Supply
    Terminal Position
    Terminal Form
    Peak Reflow Temperature (Cel)
    Number of Functions
    Supply Voltage
    Terminal Pitch
    Reflow Temperature-Max (s)
    Base Part Number
    Output
    Number of Outputs
    Operating Supply Voltage
    Supply Voltage-Max (Vsup)
    Supply Voltage-Min (Vsup)
    Number of Circuits
    Load Capacitance
    Power Dissipation
    Propagation Delay
    Quiescent Current
    Turn On Delay Time
    Frequency (Max)
    Family
    Logic Function
    Input
    Ratio - Input:Output
    Differential - Input:Output
    Same Edge Skew-Max (tskwd)
    Width
    Radiation Hardening
    RoHS Status
    Lead Free
    Published
    Height Seated (Max)
    Length
    Surface Mount
    Pbfree Code
    HTS Code
    Technology
    Reach Compliance Code
    Pin Count
    JESD-30 Code
    Qualification Status
    Operating Temperature (Max)
    Operating Temperature (Min)
    Power Supplies
    Temperature Grade
    Logic IC Type
    Max I(ol)
    Propagation Delay (tpd)
    fmax-Min
    Number of True Outputs
    Input Conditioning
    View Compare
  • PI49FCT3805AHE
    PI49FCT3805AHE
    6 Weeks
    Surface Mount
    Surface Mount
    20-SSOP (0.209, 5.30mm Width)
    20
    -40°C~85°C
    Tube
    49FCT
    e3
    Obsolete
    1 (Unlimited)
    20
    EAR99
    Matte Tin (Sn)
    Clock Drivers
    500mW
    3V~3.6V
    DUAL
    GULL WING
    260
    2
    3.3V
    0.65mm
    40
    49FCT3805
    CMOS
    10
    3.3V
    3.6V
    3V
    2
    50pF
    500mW
    5.8 ns
    30μA
    8 ns
    66MHz
    FCT
    Buffer
    CMOS, TTL
    1:5
    No/No
    0.7 ns
    5.3mm
    No
    ROHS3 Compliant
    Lead Free
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
  • PI49FCT3805BQE
    23 Weeks
    Surface Mount
    Surface Mount
    20-SSOP (0.154, 3.90mm Width)
    20
    -40°C~85°C
    Tube
    49FCT
    e3
    Active
    1 (Unlimited)
    20
    EAR99
    MATTE TIN
    Clock Drivers
    500mW
    3V~3.6V
    DUAL
    GULL WING
    260
    2
    3.3V
    0.635mm
    40
    49FCT3805
    CMOS
    10
    3.3V
    3.6V
    3V
    2
    50pF
    500mW
    5 ns
    30μA
    6.5 ns
    80MHz
    FCT
    -
    CMOS, TTL
    1:5
    No/No
    -
    3.9mm
    No
    ROHS3 Compliant
    Lead Free
    2010
    1.75mm
    8.65mm
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
  • PI49FCT3807HEX
    -
    -
    -
    -
    -
    -
    Tape & Reel (TR)
    -
    e3
    -
    1
    20
    EAR99
    MATTE TIN (787)
    Clock Drivers
    -
    -
    DUAL
    GULL WING
    260
    1
    3.3V
    0.65mm
    40
    -
    -
    -
    -
    3.6V
    3V
    -
    50pF
    -
    -
    -
    -
    -
    FCT
    -
    -
    -
    -
    0.5 ns
    5.3mm
    -
    RoHS Compliant
    -
    -
    2mm
    7.2mm
    YES
    yes
    8542.39.00.01
    CMOS
    compliant
    20
    R-PDSO-G20
    Not Qualified
    85°C
    -40°C
    3.3V
    INDUSTRIAL
    LOW SKEW CLOCK DRIVER
    0.024 A
    4.5 ns
    110 MHz
    10
    SCHMITT TRIGGER
  • PI49FCT3807AHE
    -
    -
    -
    -
    -
    -
    -
    -
    e3
    -
    1
    20
    EAR99
    MATTE TIN (787)
    Clock Drivers
    -
    -
    DUAL
    GULL WING
    260
    1
    3.3V
    0.65mm
    40
    -
    -
    -
    -
    3.6V
    3V
    -
    50pF
    -
    -
    -
    -
    -
    FCT
    -
    -
    -
    -
    0.5 ns
    5.3mm
    -
    RoHS Compliant
    Lead Free
    -
    2mm
    7.2mm
    YES
    yes
    8542.39.00.01
    CMOS
    compliant
    20
    R-PDSO-G20
    Not Qualified
    85°C
    -40°C
    3.3V
    INDUSTRIAL
    LOW SKEW CLOCK DRIVER
    -
    4 ns
    110 MHz
    10
    SCHMITT TRIGGER
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • 14 September 2023

    TDA7297 VS TDA7266: What Is The Difference?

    In audio equipment, the power amplifier is one of the crucial components. It can amplify low-voltage, low-current signals into high-voltage, high-current signals, thereby increasing output power. Among them,...
  • 15 September 2023

    ATMEGA2560-16AU Footprint, Parameters and Application

    Ⅰ. What is ATMEGA2560-16AU?ATMEGA2560-16AU is a powerful MCU microcontroller produced by Microchip Corporation of the United States. It uses the AVR CPU core, combined with a rich instruction...
  • 15 September 2023

    Comparing LM741CN and UA741CN Operational Amplifiers

    The two op amps, LM741CN and UA741CN, have similar functional and performance characteristics. They both feature single op amps and similar supply voltages and pinouts. However, they have...
  • 18 September 2023

    TL074CN Symbol, Features and Package

    Ⅰ. Overview of TL074CNⅡ. 3D Model and symbol of TL074CNⅢ. Footprint of TL074CNⅣ. Technical parametersⅤ. Features of TL074CNⅥ. Application of TL074CNⅦ. Package of TL074CNⅧ. How to optimize the...
  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.