Texas Instruments PGA204APG4

PGA204APG4 Overview
It is packaged in an PDIP-case that protects the operational amplifiers from damage. An op amp of this type is a INSTRUMENTATION AMPLIFIER-type. It is estimated that there will be at least 16 terminations this year. A total of 16 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. A type of Instrumentation Amplifier op amp ic can be identified by the fact that this is a type of Instrumentation Amplifier device. In total, the buffer amplifier consists of 16 pins. Op amp ic rates 25μV for input offset voltage. A supply current of 5.2mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 60dB. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below -40°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 85°C. There are 3 elements in this buffer amplifier. It is important to keep in mind that the power supply voltage of this electric component is below 36V, which is suitable. Keeping the linear amplifier's supply voltage above 9V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 18V volts. The quiescent current is 5.2mA. It is important that the op amp resistance stays within the range of 10GOhm.

PGA204APG4 Features
16 Pins
supply voltage of 15V
60dB voltage gain
Resistance of 10GOhm


PGA204APG4 Applications
There are a lot of Texas Instruments
PGA204APG4 Instrumentational OP Amps applications.


Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering