ON Semiconductor NB2309AI1DG

Zero Delay PLL Clock Buffer Single 15MHz to 133MHz 16-Pin SOIC Rail - Rail/Tube
NB Series 3.3 V 133 MHz Surface Mount Zero Delay Clock Buffer - SOIC-16
Zero Delay Buffer 9-Out Single-Ended Automotive 16-Pin SOIC Tube
The NB2309A is a versatile 3.3 V zero delay buffer designed to distribute high-speed clocks. It accepts one reference input and drives out nine low-skew clocks. It is available in a 16 pin package. The -1H version of the NB2309A operates at up to 133 MHz and has higher drive than the -1 devices. All parts have on-chip PLLs that lock to an input clock on the REF pin. The PLL feedback is on-chip and is obtained from the CLKOUT pad. The NB2309A has two banks of four outputs each which can be controlled by the Select inputs as shown in the Select Input Decoding Table. If all the output clocks are not required Bank B can be three-stated. The select input also allows the input clock to be directly applied to the outputs for chip and system testing purposes. Multiple NB2309A devices can accept the same input clock and distribute it. In this case the skew between the outputs of the two devices is guaranteed to be less than 700 ps. All outputs have less than 200 ps of cycle-to-cycle jitter. The input and output propagation delay is guaranteed to be less than 250 ps and the output to output skew is guaranteed to be less than 250 ps. The NB2309A is available in two different configurations as shown in the ordering information table. The NB2309AI is the base part. The NB2309AI1H is the high drive version of the -1 and its rise and fall times are much faster than -1 part.