Fairchild/ON Semiconductor MM74HC574WM

Name: MM74HC574WM
Brand: Fairchild/ON Semiconductor
SKU: 3211142-MM74HC574WM
Availability: InStock
Rating: 5 (1 reviews)

Part Number:: MM74HC574WM

Manufacturer:: Fairchild/ON Semiconductor

Ventron No:: 3211142-MM74HC574WM

Description:: IC D-TYPE POS TRG SNGL 20SOIC

ECAD Model:

Datasheet:: MM74HC574WM

Specifications

Fairchild/ON Semiconductor MM74HC574WM technical specifications, attributes, parameters and parts with similar specifications to Fairchild/ON Semiconductor MM74HC574WM.

Factory Lead Time
4 Weeks
Lifecycle Status
ACTIVE (Last Updated: 4 days ago)
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
20-SOIC (0.295, 7.50mm Width)
Number of Pins
20
Weight
801mg
Operating Temperature
-40°C~85°C TA
Packaging
Tube
Published
2005
Series
74HC
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
20
Terminal Finish
Tin (Sn)
Subcategory
FF/Latches
Technology
CMOS
Voltage - Supply
2V~6V
Terminal Position
DUAL
Terminal Form
GULL WING
Supply Voltage
4.5V
Base Part Number
74HC574
Function
Standard
Number of Outputs
9
Output Type
Tri-State, Non-Inverted
Number of Elements
1
Polarity
Non-Inverting
Supply Voltage-Max (Vsup)
6V
Power Supplies
2/6V
Supply Voltage-Min (Vsup)
2V
Number of Channels
8
Load Capacitance
50pF
Number of Ports
2
Output Current
7.8mA
Number of Bits
8
Clock Frequency
35MHz
Propagation Delay
155 ns
Quiescent Current
8μA
Turn On Delay Time
18 ns
Family
HC/UH
Logic Function
D-Type, Flip-Flop
Current - Output High, Low
7.8mA 7.8mA
Max I(ol)
0.006 A
Max Propagation Delay @ V, Max CL
27ns @ 6V, 150pF
Trigger Type
Positive Edge
Input Capacitance
5pF
Number of Output Lines
3
Clock Edge Trigger Type
Positive Edge
Height
2.35mm
Length
13mm
Width
7.6mm
Radiation Hardening
No
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free

Description

MM74HC574WM Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. As part of the package Tube, it is embedded. As configured, the output uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~6V. It is operating at -40°C~85°C TA. This logic flip flop is classified as type D-Type. The 74HCseries comprises this type of FPGA. You should not exceed 35MHzin the output frequency of the device. In total, it contains 1 elements. A total of 20terminations have been recorded. The 74HC574family includes it. Power is provided by a 4.5V supply. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. A device of this type belongs to the family of HC/UH. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 20 pins. The clock edge trigger type for this device is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. An electronic part with 8bits has been designed. Vsup reaches its maximum value at 6V. A normal operating voltage (Vsup) should remain above 2V. An electrical current of 2/6V volts is applied to it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. With an output current of 7.8mA, it is possible to design the device in any way you want. In order for the chip to function, it has 3output lines. Quiescent current is consumed by the D latch in the amount of 8μA. It is reported that there are 8 channels.

MM74HC574WM Features
Tube package
74HC series
20 pins
8 Bits
2/6V power supplies

MM74HC574WM Applications
There are a lot of ON Semiconductor MM74HC574WM Flip Flops applications.

Shift registers
Digital electronics systems
Frequency Dividers
Storage registers
Frequency Divider circuits
Matched Rise and Fall
Parallel data storage
Bus hold
Balanced 24 mA output drivers
Test & Measurement

MM74HC574WM More Descriptions

Flip Flop D-Type Bus Interface Pos-Edge 3-ST 1-Element 20-Pin SOIC W Rail
IC, 74HC CMOS, SMD, 74HC574, SOIC20; Logic Family / Base Number: 74HC574; Flip-Flop Type: D; Propagation Delay: 18ns; Frequency: 60MHz; Output Current: 7.8mA; Logic Case Style: SOIC; No. of Pins: 20Pins; Trigger Type: Positive E
The MM74HC574 high speed octal D-type flip-flops utilize advanced silicon-gate P-well CMOS technology. They possess the high noise immunity and low power consumption of standard CMOS integrated circuits, as well as the ability to drive 15 LS-TTL loads. Due to the large output drive capability and the 3-STATE feature, these devices are ideally suited for interfacing with bus lines in a bus organized system. These devices are positive edge triggered flip-flops. Data at the D inputs, meeting the set-up and hold time requirements, are transferred to the Q outputs on positive going transitions of the CLOCK (CK) input. When a high logic level is applied to the OUTPUT CONTROL (OC) input, all outputs go to a high impedance state, regardless of what signals are present at the other inputs and the state of the storage elements. The 74HC logic family is speed, function, and pinout compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.

Certification