Fairchild/ON Semiconductor MM74HC374MTC

MM74HC374MTC Overview
It is embeded in TSSOP case. There is an embedded version in the package Tube. A total of 1 elements are present. There have been 20 terminations. A voltage of 4.5V provides power to the D latch. In this case, the D flip flop belongs to the HC/UHfamily. The electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. This device has the clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. It is designed with 8bits. There are 2 ports embedded in the flip flops. Currently, there are 3 input lines present. -7.8mA is set as the high level output current. It is set to 7.8mAfor the low level output current. There should be a temperature below 85°Cduring operation. Ideally, the operating temperature should be higher than -40°C. The system operates with a minimum supply voltage of 2V. The maximum supply voltage supported by the flip flop is 6V. It is possible to achieve a frequency of 35MHz. The logic IC it adopts is BUS DRIVER. As a result, it is equipped with 1 functions . It is of 2 channels.

MM74HC374MTC Features
Tube package
20 pins
8 Bits
1 Functions

MM74HC374MTC Applications
There are a lot of ON Semiconductor MM74HC374MTC Flip Flops applications.

Patented noise
Differential Individual
Memory
Synchronous counter
2 – Bit synchronous counter
ATE
Automotive
Load Control
ESD performance
EMI reduction circuitry