MIC2505-2YM

Microchip Technology MIC2505-2YM

Part Number:
MIC2505-2YM
Manufacturer:
Microchip Technology
Ventron No:
3262331-MIC2505-2YM
Description:
IC SW HIGH SIDE SGL 2A 8SOIC
ECAD Model:
Datasheet:
MIC2505-2YM

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
Microchip Technology MIC2505-2YM technical specifications, attributes, parameters and parts with similar specifications to Microchip Technology MIC2505-2YM.
  • Factory Lead Time
    10 Weeks
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    8-SOIC (0.154, 3.90mm Width)
  • Number of Pins
    8
  • Supplier Device Package
    8-SOIC
  • Operating Temperature
    -40°C~85°C TA
  • Packaging
    Tube
  • Published
    1998
  • Feature
    Slew Rate Controlled, Status Flag
  • Part Status
    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Resistance
    30mOhm
  • Max Operating Temperature
    85°C
  • Min Operating Temperature
    -40°C
  • Current Rating
    2A
  • Base Part Number
    MIC2505
  • Number of Outputs
    1
  • Output Type
    N-Channel
  • Max Output Current
    2A
  • Number of Channels
    1
  • Interface
    On/Off
  • Max Supply Voltage
    7.5V
  • Min Supply Voltage
    2.7V
  • Current - Output (Max)
    2A
  • Nominal Supply Current
    2A
  • Output Configuration
    High Side
  • Voltage - Supply (Vcc/Vdd)
    Not Required
  • Input Type
    Non-Inverting
  • Turn On Delay Time
    2 ms
  • Switch Type
    General Purpose
  • Min Input Voltage
    2.7V
  • Max Input Voltage
    7.5V
  • Nominal Input Voltage
    7.5V
  • Turn-Off Delay Time
    20 μs
  • Ratio - Input:Output
    1:1
  • Voltage - Load
    2.7V~7.5V
  • Fault Protection
    Current Limiting (Fixed), Over Temperature, UVLO
  • Load Current
    2A
  • Rds On (Typ)
    30mOhm
  • Drain to Source Resistance
    35mOhm
  • Height
    1.48mm
  • Length
    4.93mm
  • Width
    3.94mm
  • Radiation Hardening
    No
  • REACH SVHC
    No SVHC
  • RoHS Status
    ROHS3 Compliant
  • Lead Free
    Lead Free
Description
MIC2505-2YM Description
The MIC2505-2YM is a  1A high-side Switch.

MIC2505-2YM Features
Low MOSFET On-Resistance to 3.0V - 30 mΩ Typical at 5V (MIC2505 Series) - 35 mΩ Typical at 3.3V (MIC2505 Series) - 75 mΩ Typical at 5V (Each MIC2506 Output) - 80 mΩ Typical at 3.3V (Each MIC2506 Output)
3.0V to 7.5V Input
110 µA Typical On-State Supply Current
1 µA Typical Off-State Supply Current
Output Can be Forced Higher than Input(Off-State)
Current-Limit
Thermal Shutdown
2.5V Undervoltage Lockout (UVLO)
Open-Load Detection (MIC2505YN/M and MIC2506YN/M Only)
Open-Drain Fault Flag
5 ms (Slow) Turn-On and Fast Turn-Off
Logic-Level Control/Enable Input


MIC2505-2YM Applications
USB Power Distribution
3.3V and 5V Power Management
PC Card Inrush Limiting Switch
Hot Plug-In Power Supplies
Battery Charger Circuits

MIC2505-2YM More Descriptions
MIC2505 Series 7.5 V 75 mOhm Surface Mount Single 2A High-Side Switch - SOIC-8
USB Power SW Hi Side/DIST Single 2.7V to 7.5V 4A 8-Pin SOIC - Rail/Tube
Conv DC-DC Single Step Down 4.5V to 19V 28-Pin QFN T/R
Fully Integrated High-Side Switch (Single 2Amp)
HIGH-SIDE POWER SWITCH, 7.5V, 8-SOIC
Power Supply Support Circuit, Fixed, 1 Channel, PDSO8
Tube MIC2505 Current Limiting (Fixed) Over Temperature UVLO On/Off power distribution switch 4.93mm 7.5V 2ms 2A
IC PWR SWITCH N-CHAN 1:1 8SOIC
French Electronic Distributor since 1988
IC SWITCH, HIGH SIDE, SINGLE, 2A; Power Load Switch Type:High Side; Input Voltage:7.5V; Current Limit:4A; On State Resistance:0.03ohm; Thermal Protection:Yes; On / Enable Input Polarity:Active Low; No. of Outputs:1; Internal Switch:Yes; Distribution Switch Case Style:SOIC; No. of Pins:8; Operating Temperature Range:-40°C to 85°C; SVHC:No SVHC (19-Dec-2011); Base Number:2505; Input Voltage Max:7.5V; Load Current Max:2A; No. of Channels:1; On Resistance Rds(on):0.035ohm; Operating Temperature Max:85°C; Operating Temperature Min:-40°C; Output Current Max:2A; Package / Case:SOIC; Protection Type:Yes; Supply Voltage Max:7.5V; Supply Voltage Min:2.7V; Termination Type:SMD; Voltage In Max:7.5V; Voltage In Min:2.7V; Voltage Vcc:20V
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.