Texas Instruments MF10CCN

MF10CCN Overview
There is a 20-DIP (0.300, 7.62mm) package for it.There is a Tube package that comes with it.The mounting type of the gadget is Through HoleUniversal Switched Capacitor is the type of filter for this part.Filter should be able to operate wFilterh a power source of ±9V~14V.A total of 20 pins are present on this board.In the best component of the device, there is a MF10 in it.The device is at 200kHz frequency in cutoff or center.The component is powered by a constant source of 5V.There are a number of filters, called 2, and each filter has a unique figure.When it is operating, it should be warmer than 0°C.At present, 70°C is the maximum temperature that can be reached.Filter is still possible to distinguish the component by Filters pin number 20.As far as the supply temperature is concerned, it is capable of handling up to 10mA degrees.This is one of a number of Through Hole mount packages that are included with the package.This DC DC switching regulator operates off a supply voltage of 12V.The part is Active type.In spite of this, it is still able to perform accurately at the 30kHz frequency.The voltage that it needs in order to function correctly is 7V, so the voltage must be applied to it.To operate, the supply voltage must be 4.5V.

MF10CCN Features
Supply voltage of 5V
Maximum operating temperature of 70°C
Mount of Through Hole
30kHz frequency

MF10CCN Applications
There are a lot of Texas Instruments MF10CCN active filters applications.

High- performance digital low-pass filters
Adaptive digital filters
Video Signal Processing
Adaptive Fllterlng
Antialiasing/Reconstruction Filter
Antialias or Reconstruction Filtering
Reduced cost and complexity for A/D anti-aliasing filters
Digital waveform reconstruction post- filtering
Sample Rate Converters
Low cost video filtering