ON Semiconductor MDC3105LT1G

MDC3105LT1G DescriptionThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.This device is intended to replace an array of three to six discrete components with an integrated SMT part. It is available in a SOT?23 package. It can be used to switch 3 to 6 Vdc inductive loads such as relays, solenoids, incandescent lamps, and small DC motors without the need for a free?wheeling diode.The TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm. The TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm. The TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.MDC3105LT1G FeaturesThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Provides a Robust Driver Interface between DC Relay Coil andThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Sensitive Logic CircuitsThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Optimized to Switch Relays from a 3.0 V to 5.0 V RailThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Capable of Driving Relay Coils Rated up to 2.5 W at 5.0 VThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Features Low Input Drive Current and Good Back?to?Front TransientThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.IsolationThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Internal Zener Eliminates Need for Free?Wheeling DiodeThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Internal Zener Clamp Routes Induced Current to Ground for QuieterThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.System OperationThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Guaranteed Off State with No Input ConnectionThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Supports Large Systems with Minimal Off?State LeakageThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.ESD Resistant in Accordance with the Class 1C Human Body ModelThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Low Sat Voltage Reduces System Current Drain by Allowing Use ofThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Higher Resistance Relay CoilsThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Pb?Free Packages are AvailableThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm. The TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm. The TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.MDC3105LT1G ApplicationsThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Telecom: Line Cards, Modems, Answering Machines, FAXThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Machines, Feature Phone Electronic Hook SwitchThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Computer and Office: Photocopiers, Printers, Desktop ComputersThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Consumer: TVs and VCRs, Stereo Receivers, CD Players, CassetteThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Recorders, TV Set-Top BoxesThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Industrial: Small Appliances, White Goods, Security Systems,The TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Automated Test Equipment, Garage Door OpenersThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Automotive: 5.0 V Driven Relays, Motor Controls, Power Latches,The TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.Lamp DriversThe TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.
The TO-236-3, SC-59, and SOT-23-3 package/case contains a product with a resistance of 400MOhm and a dual terminal position. The base part number is MDC3105, and it has one output configured as a low side. It does not require a voltage supply (Vcc/Vdd) and has a propagation delay of 55 μs. Each channel can handle an output current of 400mA, and the product has a length of 2.9mm.