Microchip Technology MCP47FVB12A0-E/ST

Description
The MCP47FVBXX are single- and dual-channel 8-bit, 10-bit, and 12-bit buffered voltage output Digital-to-Analog Converters (DACs) with volatile memory and an I²C serial interface. The VREF pin, the device VDD, or the internal band gap voltage can be selected as the DAC's reference voltage. When VDD is selected, VDD is connected internally to the DAC reference circuit. When the VREF pin is used, the user can select the output buffer's gain to be 1 or 2. When the gain is 2, the VREF pin voltage should be limited to a maximum of VDD/2.
These devices have a two-wire I²C-compatible serial interface for Standard (100 kHz), Fast (400 kHz), or High-Speed (1.7 MHz and 3.4 MHz) modes.

Features
Operating Voltage Range:
-2.7V to 5.5V - Full Specifications
1.8V to 2.7V - Reduced Device Specifications
Output Voltage Resolutions:
8-bit: MCP47FVBOX (256 Steps)
10-bit: MCP47FVB1X (1024 Steps)
12-bit MCP47FVB2X (4096 Steps)
Rail-to-Rail Output
Fast Setting Time of 6 us (typical)
DAC Voltage Reference Source Options:
Device VDD
External VREF pin (buffered or unbuffered)
Internal Band Gap (1.22V typical)
Output Gain Options:
(1x) Unity
2x (when not using internal VDD as voltage source)
Power-on/Brown-out Reset Protection
Power-Down Modes:
Disconnects output buffer (High Impedance)
Selection of Vout pull-down resistors (100 kΩ or 1 kΩ)
Low Power Consumption:
Normal operation: <180 μA (Single), 380 μA (Dual)
Power-down operation: 650 nA typical
I²C Interface:
Slave address options: four predefined addresses
Standard (100 kbps), Fast (400 kbps), and High-Speed (up to 3.4 Mbps) modes
High Voltage Command Support (MCP47FEBXX compatibility)
Package Types: 8-lead TSSOP
Extended Temperature Range: -40°C to 125°C

Applications
Set Point or Offset Trimming
Sensor Calibration
Low-Power Portable Instrumentation
PC Peripherals
Data Acquisition Systems
Motor Control