Maxim Integrated MAX1498ECJ
- Part Number:
- MAX1498ECJ
- Manufacturer:
- Maxim Integrated
- Ventron No:
- 3017969-MAX1498ECJ
- Description:
- IC ADC 4 1/2DIG W/LED DVR 32LQFP
- Datasheet:
- MAX1498ECJ
Description
The MAX1447/MAX1496/MAX1498 are low-power, 3.5- and 4.5-digit analog-to-digital converters (ADCs) with integrated light-emitting diode (LED) drivers. They operate from a single 2.7V to 5.25V power supply and include an internal reference, a high-accuracy on-chip oscillator, and a multiplexed LED display driver. An internal charge pump generates the negative supply needed to power the integrated input buffers for single-supply operation.
The ADC is configurable for either a ±2V or 200mV input range and it outputs its conversion results to an LED. The MAX1496 is a 3.5-digit (1999 count) device and the MAX1447/MAX1498 are 4.5-digit ( 19,999 count) devices.
The MAX1447/MAX1496/MAX1498 do not require external precision integrating capacitors, autozero capacitors, crystal oscillators, charge pumps, or other circuitry required with dual-slope ADCs (commonly used in panel meter circuits).
These devices also feature on-chip buffers for the differential signal and reference input, allowing direct interface with high-impedance signal sources. In addition, they use continuous internal offset-calibration and offer >100dB rejection of 50Hz and 60Hz line noise.
Other features include data hold and peak detection and overrange/underrange detection. The MAX1447 features on-demand enhanced offset calibration for improved offset performance.
Features
MAX1447/MAX1498: 4.5 Digits (±19,999 Count)
MAX1496: 3.5 Digits (±1999 Count)
Sigma-Delta ADC Architecture
No Integrating Capacitors Required
No Autozeroing Capacitors Required
>100dB of Simultaneous 50Hz and 60Hz Rejection
Selectable Input Range of 2200mV or ±2V
Selectable Voltage Reference: Internal 2.048V or External
Internal High-Accuracy Oscillator Needs No External Components
Automatic Offset Calibration
On-Demand Enhanced Offset Calibration (MAX1447)
Operate from a Single 2.7V to 5.25V Supply
Low Power (Exclude LED-Driver Current)
Maximum 744μA Operating Current (MAX1496)
Maximum 960μA Operating Current (MAX1447/MAX1498)
Maximum 325μA Shutdown Current
Multiplexed Common-Cathode LED Drivers
Resistor-Programmable Segment Current
Small 32-Pin, 7mm x 7mm TQFP Package (4.5 Digits), 28-Pin SSOP Package (3.5 Digits)
Also Available in a PDIP Package (3.5 Digits)
Applications
Digital Panel Meters
Hand-Held Meters
Digital Voltmeters
Digital Multimeters
The MAX1447/MAX1496/MAX1498 are low-power, 3.5- and 4.5-digit analog-to-digital converters (ADCs) with integrated light-emitting diode (LED) drivers. They operate from a single 2.7V to 5.25V power supply and include an internal reference, a high-accuracy on-chip oscillator, and a multiplexed LED display driver. An internal charge pump generates the negative supply needed to power the integrated input buffers for single-supply operation.
The ADC is configurable for either a ±2V or 200mV input range and it outputs its conversion results to an LED. The MAX1496 is a 3.5-digit (1999 count) device and the MAX1447/MAX1498 are 4.5-digit ( 19,999 count) devices.
The MAX1447/MAX1496/MAX1498 do not require external precision integrating capacitors, autozero capacitors, crystal oscillators, charge pumps, or other circuitry required with dual-slope ADCs (commonly used in panel meter circuits).
These devices also feature on-chip buffers for the differential signal and reference input, allowing direct interface with high-impedance signal sources. In addition, they use continuous internal offset-calibration and offer >100dB rejection of 50Hz and 60Hz line noise.
Other features include data hold and peak detection and overrange/underrange detection. The MAX1447 features on-demand enhanced offset calibration for improved offset performance.
Features
MAX1447/MAX1498: 4.5 Digits (±19,999 Count)
MAX1496: 3.5 Digits (±1999 Count)
Sigma-Delta ADC Architecture
No Integrating Capacitors Required
No Autozeroing Capacitors Required
>100dB of Simultaneous 50Hz and 60Hz Rejection
Selectable Input Range of 2200mV or ±2V
Selectable Voltage Reference: Internal 2.048V or External
Internal High-Accuracy Oscillator Needs No External Components
Automatic Offset Calibration
On-Demand Enhanced Offset Calibration (MAX1447)
Operate from a Single 2.7V to 5.25V Supply
Low Power (Exclude LED-Driver Current)
Maximum 744μA Operating Current (MAX1496)
Maximum 960μA Operating Current (MAX1447/MAX1498)
Maximum 325μA Shutdown Current
Multiplexed Common-Cathode LED Drivers
Resistor-Programmable Segment Current
Small 32-Pin, 7mm x 7mm TQFP Package (4.5 Digits), 28-Pin SSOP Package (3.5 Digits)
Also Available in a PDIP Package (3.5 Digits)
Applications
Digital Panel Meters
Hand-Held Meters
Digital Voltmeters
Digital Multimeters
Maxim Integrated MAX1498ECJ technical specifications, attributes, parameters and parts with similar specifications to Maxim Integrated MAX1498ECJ .
- Factory Lead Time6 Weeks
- Mounting TypeSurface Mount
- Package / Case32-LQFP
- Surface MountYES
- Operating Temperature-40°C~85°C
- PackagingTray
- Published2004
- JESD-609 Codee3
- Pbfree Codeyes
- Part StatusActive
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations32
- ECCN CodeEAR99
- Terminal FinishMatte Tin (Sn)
- SubcategoryAnalog to Digital Converters
- TechnologyBICMOS
- Voltage - Supply2.7V~5.25V
- Terminal PositionQUAD
- Terminal FormGULL WING
- Peak Reflow Temperature (Cel)260
- Number of Functions1
- Supply Voltage3.3V
- Terminal Pitch0.8mm
- Reflow Temperature-Max (s)NOT SPECIFIED
- Base Part NumberMAX1498
- Pin Count32
- Qualification StatusNot Qualified
- Power Supplies3/5V
- Number of Channels2
- Number of Analog In Channels1
- Sampling Rate (Per Second)50
- Output Bit CodeBINARY
- Analog Input Voltage-Max2V
- Voltage Supply SourceSingle Supply
- Resolution (Bits)4.5 Digit
- Height Seated (Max)1.6mm
- Length7mm
- Width7mm
- RoHS StatusROHS3 Compliant
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
31 January 2024
TXS0108EPWR Level Shifter Specifications, Architecture, Functions, Package and Applications
Ⅰ. What is TXS0108EPWR?Ⅱ. Specifications of TXS0108EPWRⅢ. Architecture of TXS0108EPWRⅣ. Functions of TXS0108EPWRⅤ. Package of TXS0108EPWRⅥ. What are the advantages and disadvantages of TXS0108EPWR?Ⅶ. Where is TXS0108EPWR used?The... -
01 February 2024
L7812CV Voltage Regulator: Internal Structure, Characteristics, Specifications and Other Details
Ⅰ. L7812CV descriptionⅡ. Internal structure and working principle of L7812CVⅢ. Pin configuration of L7812CVⅣ. What are the characteristics of L7812CV?Ⅴ. How to judge the quality of L7812CV?Ⅵ. Specifications... -
01 February 2024
REF3030AIDBZR Specifications, Symbol, Applications and REF3030AIDBZR vs REF3030AIDBZT
Ⅰ. Overview of REF3030AIDBZRⅡ. Specifications of REF3030AIDBZRⅢ. Symbol, footprint and pin configuration of REF3030AIDBZRⅣ. Features of REF3030AIDBZRⅤ. In which applications can we use REF3030AIDBZR?Ⅵ. What is the difference... -
02 February 2024
TL431AIDBZR Shunt Regulator Replacements, Working Principle, Typical Characteristics, Performance and Function
Ⅰ. Description of TL431AIDBZRⅡ. How does TL431AIDBZR work?Ⅲ. Typical characteristics of TL431AIDBZRⅣ. Performance of TL431AIDBZRⅤ. Specifications of TL431AIDBZRⅥ. How to adjust the output voltage of TL431AIDBZR?Ⅶ. Absolute maximum...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.