Texas Instruments LP2951ACN

Fixed/Adjustable Positive LDO Regulator, 1.24V Min, 29V Max, 0.6V Dropout, BIPolar, PDIP8
LDO Regulator 1.24V to 29V 0.1A 8-Pin MDIP Rail
Series of Adjustable Micropower Voltage Regulators 8-PDIP -40 to 125
Micropower Voltage Regulators | IC REG LIN POS ADJ 100MA 8DIP
Linear Voltage Regulator IC; Voltage Regulator Type:LDO Linear; Input Voltage Primary Max:30V; Output Voltage Max:29V; Dropout Voltage, Vdo:380mV; Supply Voltage Max:30V; Package/Case:8-DIP; No. of Pins:8 ;RoHS Compliant: No
V REG LDO ADJ 1.2429V, 2951, DIP8; Primary Input Voltage:30V; Output Voltage Adjustable Range:1.24V to 29V; Dropout Voltage Vdo:380mV; No. of Pins:8; Output Current:100mA; Voltage Regulator Case Style:DIP; Operating Temperature Range:-40°C to 125°C; SVHC:No SVHC (19-Dec-2011); Accuracy %:0.5%; Adjustable Output Voltage Max:29V; Adjustable Output Voltage Min:1.24V; Base Number:2951; Device Marking:LP2951ACN; IC Generic Number:2951; Input Voltage Max:30V; Input Voltage Min:-0.3V; Logic Function Number:2951; No. of Outputs:1; Operating Temperature Max:125°C; Operating Temperature Min:-40°C; Operating Voltage Tolerance :0.5%; Output Current Max:0.1A; Output Voltage:29V; Output Voltage Max:29V; Output Voltage Min:1.4V; Package / Case:DIP; Supply Voltage Max:30V; Termination Type:Through Hole; Voltage Regulator Type:Positive Adjustable
The LP2950 and LP2951 are micro power voltage regulators with very low quiescent current (75uA typ.) and very low dropout voltage (typ. 40mV at light loads and 380mV at 100mA). They are ideally suited for use in battery-powered systems. Furthermore, the quiescent current of the LP2950/ LP2951 increases only slightly in dropout, prolonging battery life. The LP2950-5.0 is available in the surface-mount D-Pak package, and in the popular 3-pin TO-92 package for pincompatibility with older 5V regulators. The 8-lead LP2951 is available in plastic, ceramic dual-in-line, LLP, or metal can packages and offers additional system functions. One such feature is an error flag output which warns of a low output voltage, often due to falling batteries on the input. It may be used for a power-on reset. A second feature is the logic-compatible shutdown input which enables the regulator to be switched on and off. Also, the part may be pin-strapped for a 5V, 3V, or 3.3V output (depending on the version), or programmed from 1.24V to 29V with an external pair of resistors. Careful design of the LP2950/LP2951 has minimized all contributions to the error budget. This includes a tight initial tolerance (.5% typ.), extremely good load and line regulation (.05% typ.) and a very low output voltage temperature coefficient, making the part useful as a low-power voltage reference.