LM7171BIN

Texas Instruments LM7171BIN

Part Number:
LM7171BIN
Manufacturer:
Texas Instruments
Ventron No:
3194143-LM7171BIN
Description:
IC OPAMP VFB 200MHZ 8DIP
ECAD Model:
Datasheet:
LM7171

Quick Request Quote

Please send RFQ , We will respond immediately.

Part Number
Quantity
Company
E-mail
Phone
Comments
Specifications
Texas Instruments LM7171BIN technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments LM7171BIN.
  • Mounting Type
    Through Hole
  • Package / Case
    8-DIP (0.300, 7.62mm)
  • Surface Mount
    NO
  • Operating Temperature
    -40°C~85°C
  • Packaging
    Tube
  • Series
    VIP™ III
  • JESD-609 Code
    e0
  • Pbfree Code
    no
  • Part Status
    Obsolete
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    8
  • Terminal Finish
    TIN LEAD
  • Subcategory
    Operational Amplifier
  • Technology
    BIPOLAR
  • Terminal Position
    DUAL
  • Peak Reflow Temperature (Cel)
    260
  • Number of Functions
    1
  • Supply Voltage
    5V
  • Terminal Pitch
    2.54mm
  • Reach Compliance Code
    unknown
  • Time@Peak Reflow Temperature-Max (s)
    40
  • Pin Count
    8
  • JESD-30 Code
    R-PDIP-T8
  • Number of Circuits
    1
  • Current - Supply
    6.5mA
  • Slew Rate
    4100V/μs
  • Amplifier Type
    Voltage Feedback
  • Common Mode Rejection Ratio
    104 dB
  • Current - Input Bias
    2.7μA
  • Voltage - Supply, Single/Dual (±)
    5.5V~36V ±2.75V~18V
  • Gain Bandwidth Product
    200MHz
  • Neg Supply Voltage-Nom (Vsup)
    -5V
  • Unity Gain BW-Nom
    125000 kHz
  • Voltage - Input Offset
    200μV
  • Current - Output / Channel
    118mA
  • 3db Bandwidth
    220MHz
  • Height Seated (Max)
    5.08mm
  • RoHS Status
    Non-RoHS Compliant
Description
LM7171BIN Overview
It is packaged in an 8-DIP (0.300, 7.62mm)-case that protects the operational amplifiers from damage. An op amp of this type is a Voltage Feedback-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. This electronic part is recommended for mounting type Through Hole. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of -40°C~85°C. This op amp ic has 1 circuits. For optimal performance, this electrical part should be connected to a supply with a current of 6.5mA. Buffer op amp series numbers are indicated by the VIP™ III.

LM7171BIN Features
8 Pins
supply voltage of 5V


LM7171BIN Applications
There are a lot of Rochester Electronics, LLC
LM7171BIN Instrumentational OP Amps applications.


Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
LM7171BIN More Descriptions
Non-RoHS Compliant R-PDIP-T8 TIN LEAD Tube op amp buffer circuit 5.08mm 2.7muA -5V 125000kHz
Very High Speed, High Output Current, Voltage Feedback Amplifier 8-PDIP -40 to 85
OP Amp Single Volt Fdbk ±18V/36V 8-Pin PDIP Rail
OP AMP, VOLT FEEDBACK, 7171, DIP8; Op Amp Type:High Speed; No. of Amplifiers:1; Bandwidth:200MHz; Slew Rate:4100V/µs; Supply Voltage Range:5.5V to 36V; Amplifier Case Style:DIP; No. of Pins:8; Operating Temperature Range:-40°C to 85°C; SVHC:No SVHC (19-Dec-2011); Amplifier Type:Voltage Feedback; Base Number:7171; Gain Bandwidth:140MHz; IC Generic Number:7171; Input Offset Voltage Max:7mV; Logic Function Number:7171; Operating Temperature Max:85°C; Operating Temperature Min:-40°C; Operational Amplifier Features:High Speed; Package / Case:DIP; Slew Rate:4100V/µs; Supply Voltage Nom:15V; Supply Voltage Max:36V; Supply Voltage Min:5.5V; Termination Type:Through Hole
The LM7171 is a high speed voltage feedback amplifier that has the slewing characteristic of a current feedback amplifier; yet it can be used in all traditional voltage feedback amplifier configurations. The LM7171 is stable for gains as low as 2 or -1. It provides a very high slew rate at 4100V/us and a wide unity-gain bandwidth of 200 MHz while consuming only 6.5 mA of supply current. It is ideal for video and high speed signal processing applications such as HDSL and pulse amplifiers. With 100 mA output current, the LM7171 can be used for video distribution, as a transformer driver or as a laser diode driver. Operation on -15V power supplies allows for large signal swings and provides greater dynamic range and signal-to noise ratio. The LM7171 offers low SFDR and THD, ideal for ADC/DAC systems. In addition, the LM7171 is specified for - 5V operation for portable applications. The LM7171 is built on National's advanced VIP(TM) III (Vertically integrated PNP) complementary bipolar process.
Product Comparison
The three parts on the right have similar specifications to LM7171BIN.
  • Image
    Part Number
    Manufacturer
    Mounting Type
    Package / Case
    Surface Mount
    Operating Temperature
    Packaging
    Series
    JESD-609 Code
    Pbfree Code
    Part Status
    Moisture Sensitivity Level (MSL)
    Number of Terminations
    Terminal Finish
    Subcategory
    Technology
    Terminal Position
    Peak Reflow Temperature (Cel)
    Number of Functions
    Supply Voltage
    Terminal Pitch
    Reach Compliance Code
    Time@Peak Reflow Temperature-Max (s)
    Pin Count
    JESD-30 Code
    Number of Circuits
    Current - Supply
    Slew Rate
    Amplifier Type
    Common Mode Rejection Ratio
    Current - Input Bias
    Voltage - Supply, Single/Dual (±)
    Gain Bandwidth Product
    Neg Supply Voltage-Nom (Vsup)
    Unity Gain BW-Nom
    Voltage - Input Offset
    Current - Output / Channel
    3db Bandwidth
    Height Seated (Max)
    RoHS Status
    Lifecycle Status
    Mount
    Number of Pins
    ECCN Code
    Terminal Form
    Base Part Number
    Operating Supply Voltage
    Number of Channels
    Operating Supply Current
    Nominal Supply Current
    Output Current
    Output Current per Channel
    Input Offset Voltage (Vos)
    Bandwidth
    Voltage Gain
    Power Supply Rejection Ratio (PSRR)
    Low-Offset
    Frequency Compensation
    Low-Bias
    Micropower
    Programmable Power
    Input Offset Current-Max (IIO)
    Height
    Length
    Width
    Thickness
    REACH SVHC
    Radiation Hardening
    Lead Free
    Packing Method
    Number of Elements
    Bias Current-Max (IIB) @25C
    Wideband
    View Compare
  • LM7171BIN
    LM7171BIN
    Through Hole
    8-DIP (0.300, 7.62mm)
    NO
    -40°C~85°C
    Tube
    VIP™ III
    e0
    no
    Obsolete
    1 (Unlimited)
    8
    TIN LEAD
    Operational Amplifier
    BIPOLAR
    DUAL
    260
    1
    5V
    2.54mm
    unknown
    40
    8
    R-PDIP-T8
    1
    6.5mA
    4100V/μs
    Voltage Feedback
    104 dB
    2.7μA
    5.5V~36V ±2.75V~18V
    200MHz
    -5V
    125000 kHz
    200μV
    118mA
    220MHz
    5.08mm
    Non-RoHS Compliant
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
    -
  • LM7171AIM
    Surface Mount
    8-SOIC (0.154, 3.90mm Width)
    -
    -40°C~85°C
    Tube
    VIP™ III
    e0
    -
    Not For New Designs
    1 (Unlimited)
    8
    Tin/Lead (Sn/Pb)
    Operational Amplifier
    BIPOLAR
    DUAL
    235
    1
    5V
    -
    -
    -
    8
    -
    -
    -
    4100V/μs
    Voltage Feedback
    80 dB
    2.7μA
    5.5V~36V ±2.75V~18V
    -
    -5V
    200000 kHz
    200μV
    -
    220MHz
    -
    Non-RoHS Compliant
    NRND (Last Updated: 2 days ago)
    Surface Mount
    8
    EAR99
    GULL WING
    LM7171
    18V
    1
    6.5mA
    6.5mA
    100mA
    118mA
    1.5mV
    200MHz
    78dB
    85dB
    NO
    YES AVCL>=2
    NO
    NO
    NO
    4μA
    1.75mm
    4.9mm
    3.91mm
    1.58mm
    No SVHC
    No
    Contains Lead
    -
    -
    -
    -
  • LM7121IMX
    Surface Mount
    8-SOIC (0.154, 3.90mm Width)
    -
    -40°C~85°C
    Tape & Reel (TR)
    -
    e0
    no
    Obsolete
    1 (Unlimited)
    8
    Tin/Lead (Sn/Pb)
    Operational Amplifier
    BIPOLAR
    DUAL
    235
    1
    15V
    -
    -
    -
    8
    -
    -
    -
    1300V/μs
    Voltage Feedback
    70 dB
    5.2μA
    4.5V~33V ±2.25V~16.5V
    175MHz
    -15V
    175000 kHz
    -
    -
    235MHz
    -
    Non-RoHS Compliant
    -
    Surface Mount
    8
    EAR99
    GULL WING
    LM7121
    16.5V
    -
    5.3mA
    5.3mA
    71mA
    71mA
    900μV
    -
    64dB
    85dB
    NO
    YES
    NO
    NO
    NO
    -
    -
    4.9mm
    -
    -
    -
    No
    Contains Lead
    TAPE AND REEL
    1
    9.5μA
    YES
  • LM7121IM
    Surface Mount
    8-SOIC (0.154, 3.90mm Width)
    -
    -40°C~85°C
    Tube
    -
    e0
    -
    Not For New Designs
    1 (Unlimited)
    8
    Tin/Lead (Sn/Pb)
    Operational Amplifier
    BIPOLAR
    DUAL
    235
    1
    15V
    -
    -
    -
    8
    -
    -
    -
    1300V/μs
    Voltage Feedback
    70 dB
    5.2μA
    4.5V~33V ±2.25V~16.5V
    175MHz
    -15V
    175000 kHz
    900μV
    -
    235MHz
    -
    Non-RoHS Compliant
    NRND (Last Updated: 1 week ago)
    Surface Mount
    8
    EAR99
    GULL WING
    LM7121
    16.5V
    1
    5.3mA
    5.3mA
    71mA
    71mA
    15mV
    230MHz
    64dB
    85dB
    NO
    YES
    NO
    NO
    NO
    4.3μA
    1.75mm
    4.9mm
    3.91mm
    1.58mm
    No SVHC
    No
    Contains Lead
    -
    -
    9.5μA
    -
Certification
  • ISO 9001
  • ISO 13485
  • ISO 45001
  • ASA
  • ESD
  • DUNS
  • SMTA
  • ROHS

Latest News

  • cost

    Help you to save your cost and time.

  • package

    Reliable package for your goods.

  • fast

    Fast Reliable Delivery to save time.

  • service

    Quality premium after-sale service.