Texas Instruments LM311N/NOPB

LM311N/NOPB Overview
The product is packaged in 8-DIP (0.300, 7.62mm) to facilitate transportation.A comparator with an output type of DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL is being used.As a result, it is designed with Tube package.Electronic comparator is possible to find the 8 terminals of the comparator.The chip belongs to Comparator .With a voltage of 15V supplied, the comparator is capable of performing a wide range of demanding tasks.In general, the chip type can be classified as General Purpose .A total of 1 elements can be found in it.The device contains 8 pins.A Through Hole mounting type is recommended.Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.The comparator has 8 pins.You can find more pin-to-pin solutions by searching LM311 .A quiescent current of 5.1mA is displayed by this comparator.The board has a Through Hole for mounting on a PCB or any other board.Normally, the nominal supply current should be 7.5mA when using the device.A supply current exceeding -5mA may result in the comparator malfunctioning.A maximum current of 250nA can be supplied to the device.The voltage gain of the part is indicated by 106.02dB in the voltage formula.Comparator electronics is necessary to have a voltage of 28V for normal operation.

LM311N/NOPB Features
DTL, MOS, Open-Collector, Open-Emitter, RTL, TTL output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 5.1mA
Voltage Gain: 106.02dB

LM311N/NOPB Applications
There are a lot of Texas Instruments LM311N/NOPB linear comparators applications.

Self-diagnostics
Consumer Medical Electronics
Infotainment and Clusters
Factory automation & control
General-Purpose, Low-Voltage Applications
Wearable Devices
Ultra-Low Power Systems
System control and monitoring
DC/DC and AC/DC power supplies
Mobile Communications