Texas Instruments LM2917N-8/NOPB
- Part Number:
- LM2917N-8/NOPB
- Manufacturer:
- Texas Instruments
- Ventron No:
- 3282336-LM2917N-8/NOPB
- Description:
- Frequency-to-voltage converter for ground or supply referred load up to 50-mA (with Zener regulat
- Datasheet:
- lm2917-n
Texas Instruments LM2917N-8/NOPB technical specifications, attributes, parameters and parts with similar specifications to Texas Instruments LM2917N-8/NOPB.
- Factory Lead Time6 Weeks
- Lifecycle StatusACTIVE (Last Updated: 4 days ago)
- Contact PlatingTin
- MountThrough Hole
- Mounting TypeThrough Hole
- Package / Case8-DIP (0.300, 7.62mm)
- Number of Pins8
- Weight930.006106mg
- PackagingTube
- JESD-609 Codee3
- Pbfree Codeyes
- Part StatusActive
- Moisture Sensitivity Level (MSL)1 (Unlimited)
- Number of Terminations8
- ECCN CodeEAR99
- Max Operating Temperature85°C
- Min Operating Temperature-40°C
- SubcategoryAnalog Special Function Converters
- TechnologyBIPOLAR
- Terminal PositionDUAL
- Number of Functions1
- Supply Voltage12V
- Terminal Pitch2.54mm
- Frequency10kHz
- Base Part NumberLM2917
- Pin Count8
- Output Voltage8.3V
- Operating Supply Voltage12V
- Temperature GradeINDUSTRIAL
- Number of Channels1
- Max Supply Voltage28V
- Min Supply Voltage6V
- Supply Current-Max6mA
- Supply TypeSingle
- Linearity±0.3%
- Height5.08mm
- Length9.81mm
- Width6.35mm
- Thickness3.9mm
- Radiation HardeningNo
- REACH SVHCNo SVHC
- RoHS StatusROHS3 Compliant
- Lead FreeLead Free
LM2917N-8/NOPB Overview
As part of the 8-DIP (0.300, 7.62mm) package, it is embedded. The electronic component is mounted in the direction of Through Hole. There is a package in the way of Tube. There is a device of the type Frequency to Voltage being used. There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This device has a pin count of 8. A supply voltage of 12V powers it. According to the base part number, its related parts can be founded. There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. For the purpose of ensuring the reliability of the device, it operates at a minimum operating temperature of -40°C. In order to ensure the reliability of the device, it operates at the maximum operating temperature of 85°C. A Through Hole mounting is used. The part is included in Analog Special Function Converters. It is recommended that the supply voltage (Vsup) exceed 6V. In this case, 28V is the maximum supply voltage (Vsup). A frequency of 10kHz is used for its operation. A voltage of 12V is required to operate this electrical device. There is a type Single supply on this electronic part. A maximal supply current of 6mA is used to operate it. This device supports an output voltage of 8.3V.
LM2917N-8/NOPB Features
8-DIP (0.300, 7.62mm) package
8 terminations
8 pin count
8 pins
The maximal supply current of 6mA
LM2917N-8/NOPB Applications
There are a lot of Texas Instruments LM2917N-8/NOPB V/F & F/V Converters applications.
Motor speed control
Cruise Control
Speedometers
Frequency Meters/Tachometer
Frequency to Voltage Conversions
Remote-Sensor Monitoring
Integrating a/d converter
Serial frequency output
Breaker Point Dwell Meters
13-bit Analog-to-Digital Converters (ADC)
As part of the 8-DIP (0.300, 7.62mm) package, it is embedded. The electronic component is mounted in the direction of Through Hole. There is a package in the way of Tube. There is a device of the type Frequency to Voltage being used. There are 8 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This device has a pin count of 8. A supply voltage of 12V powers it. According to the base part number, its related parts can be founded. There are 8 pins, which are pronged contacts as part of a signal interface in a computer or other communications device. For the purpose of ensuring the reliability of the device, it operates at a minimum operating temperature of -40°C. In order to ensure the reliability of the device, it operates at the maximum operating temperature of 85°C. A Through Hole mounting is used. The part is included in Analog Special Function Converters. It is recommended that the supply voltage (Vsup) exceed 6V. In this case, 28V is the maximum supply voltage (Vsup). A frequency of 10kHz is used for its operation. A voltage of 12V is required to operate this electrical device. There is a type Single supply on this electronic part. A maximal supply current of 6mA is used to operate it. This device supports an output voltage of 8.3V.
LM2917N-8/NOPB Features
8-DIP (0.300, 7.62mm) package
8 terminations
8 pin count
8 pins
The maximal supply current of 6mA
LM2917N-8/NOPB Applications
There are a lot of Texas Instruments LM2917N-8/NOPB V/F & F/V Converters applications.
Motor speed control
Cruise Control
Speedometers
Frequency Meters/Tachometer
Frequency to Voltage Conversions
Remote-Sensor Monitoring
Integrating a/d converter
Serial frequency output
Breaker Point Dwell Meters
13-bit Analog-to-Digital Converters (ADC)
LM2917N-8/NOPB More Descriptions
Converter; Frequency to Voltage; 8 pin; Dual-In-Line; 25 mA; 10.5 Ohms (Typ.); 2
Voltage / Frequency (V/F & F/V) Converter IC; Converter Type:Frequency/Voltage; Output Voltage Max:8.3V; Linearity %:1%; Package/Case:8-DIP; No. of Pins:8; Peak Reflow Compatible (260 C):Yes ;RoHS Compliant: Yes
IC, CONVERTER, V/F, F/V; Linearity %:1%; Supply Voltage Range:28V; Digital IC Case Style:DIP; No. of Pins:8; SVHC:No SVHC (19-Dec-2011); Converter Type:Frequency / Voltage; Input Voltage Max:28V; Linearity:0.3%; Operating Temperature Range:-40°C to 85°C; Output Current Max:240µA; Output Voltage Max:8.3V; Package / Case:DIP; Supply Current:3.8mA; Supply Voltage Max:28V; Termination Type:Through Hole
The LM2907, LM2917 series are monolithic frequency to voltage converters with a high gain op amp/comparator designed to operate a relay, lamp, or other load when the input frequency reaches or exceeds a selected rate. The tachometer uses a charge pump technique and offers frequency doubling for low ripple, full input protection in two versions (LM2907-8, LM2917-8) and its output swings to ground for a zero frequency input. The op amp/comparator is fully compatible with the tachometer and has a floating transistor as its output. This feature allows either a ground or supply referred load of up to 50 mA. The collector may be taken above VCC up to a maximum VCE of 28V. The two basic configurations offered include an 8-pin device with a ground referenced tachometer input and an internal connection between the tachometer output and the op amp non-inverting input. This version is well suited for single speed or frequency switching or fully buffered frequency to voltage conversion applications. The more versatile configurations provide differential tachometer input and uncommitted op amp inputs. With this version the tachometer input may be floated and the op amp becomes suitable for active filter conditioning of the tachometer output. Both of these configurations are available with an active shunt regulator connected across the power leads. The regulator clamps the supply such that stable frequency to voltage and frequency to current operations are possible with any supply voltage and a suitable resistor.
Voltage / Frequency (V/F & F/V) Converter IC; Converter Type:Frequency/Voltage; Output Voltage Max:8.3V; Linearity %:1%; Package/Case:8-DIP; No. of Pins:8; Peak Reflow Compatible (260 C):Yes ;RoHS Compliant: Yes
IC, CONVERTER, V/F, F/V; Linearity %:1%; Supply Voltage Range:28V; Digital IC Case Style:DIP; No. of Pins:8; SVHC:No SVHC (19-Dec-2011); Converter Type:Frequency / Voltage; Input Voltage Max:28V; Linearity:0.3%; Operating Temperature Range:-40°C to 85°C; Output Current Max:240µA; Output Voltage Max:8.3V; Package / Case:DIP; Supply Current:3.8mA; Supply Voltage Max:28V; Termination Type:Through Hole
The LM2907, LM2917 series are monolithic frequency to voltage converters with a high gain op amp/comparator designed to operate a relay, lamp, or other load when the input frequency reaches or exceeds a selected rate. The tachometer uses a charge pump technique and offers frequency doubling for low ripple, full input protection in two versions (LM2907-8, LM2917-8) and its output swings to ground for a zero frequency input. The op amp/comparator is fully compatible with the tachometer and has a floating transistor as its output. This feature allows either a ground or supply referred load of up to 50 mA. The collector may be taken above VCC up to a maximum VCE of 28V. The two basic configurations offered include an 8-pin device with a ground referenced tachometer input and an internal connection between the tachometer output and the op amp non-inverting input. This version is well suited for single speed or frequency switching or fully buffered frequency to voltage conversion applications. The more versatile configurations provide differential tachometer input and uncommitted op amp inputs. With this version the tachometer input may be floated and the op amp becomes suitable for active filter conditioning of the tachometer output. Both of these configurations are available with an active shunt regulator connected across the power leads. The regulator clamps the supply such that stable frequency to voltage and frequency to current operations are possible with any supply voltage and a suitable resistor.
Popular Search Part Number
Related Keywords
Search Tags
Latest News
-
18 December 2023
Can CR2032 Button Battery Be Recharged?
Ⅰ. What is CR2032 battery?Ⅱ. Development of CR2032 lithium button batteryⅢ. Five major brands of CR2032 button batteriesⅣ. Applications and application circuit of CR2032 button batteryⅤ. Is the... -
19 December 2023
DS1990A: An Authentication and Data Storage Solution that Balances Efficiency and Security
Ⅰ. What is iButton?Ⅱ. Overview of DS1990A iButtonⅢ. Functional block diagram of DS1990AⅣ. Where is DS1990A iButton used?Ⅴ. How does DS1990A communicate with the host device?Ⅵ. Specifications of... -
19 December 2023
PT2399: The Next-Gen Digital Delay and Echo Audio Processor IC
Ⅰ. What is PT2399?Ⅱ. Structure and working principle of PT2399Ⅲ. Total harmonic distortion and noise of PT2399Ⅳ. Which one is better, PT2399 or PT2399?Ⅴ. Who is the manufacturer... -
20 December 2023
What is the STM32F103C8T6 Microcontroller and How Does It Work?
Ⅰ. STM32F103C8T6 overviewⅡ. What are the features of STM32F103C8T6?Ⅲ. Programming of STM32F103C8T6Ⅳ. STM32F103C8T6 priceⅤ. What is the difference between STM32F103C8T6 and CH32F103C8T6?Ⅵ. Decoupling circuit of STM32F103C8T6Ⅶ. Several working...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.