LM2907MX-8

Part Number:: LM2907MX-8

Manufacturer:

Ventron No:: 4549751-LM2907MX-8

Description:: IC CONVERTER FREQ-VOLTAGE 8-SOIC

ECAD Model:

Datasheet:: LM2907MX-8

Specifications

LM2907MX-8 technical specifications, attributes, parameters and parts with similar specifications to LM2907MX-8.

Mounting Type
Surface Mount
Package / Case
8-SOIC (0.154, 3.90mm Width)
Surface Mount
YES
Number of Pins
8
Packaging
Tape & Reel (TR)
JESD-609 Code
e0
Pbfree Code
no
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn/Pb)
Max Operating Temperature
85°C
Min Operating Temperature
-40°C
Subcategory
Analog Special Function Converters
Technology
BIPOLAR
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
235
Number of Functions
1
Supply Voltage
12V
Terminal Pitch
1.27mm
Frequency
10kHz
Base Part Number
LM2907
Pin Count
8
Temperature Grade
INDUSTRIAL
Max Supply Voltage
28V
Min Supply Voltage
12V
Supply Current-Max
6mA
Linearity
±0.3%
Positive Input Voltage-Max
10.5V
Height Seated (Max)
1.75mm
Length
4.9mm
Width
3.9mm
Radiation Hardening
No
RoHS Status
Non-RoHS Compliant
Lead Free
Contains Lead

Description

LM2907MX-8 Overview
As part of the 8-SOIC (0.154, 3.90mm Width) package, it is embedded. The electronic component is mounted in the direction of Surface Mount. As described in Tape & Reel (TR), it is packaged in this way. The type of this electrical device is Frequency to Voltage. It is possible to terminate a transmission line with a 8 termination, which is an end device that matches the line's characteristic impedance. This device has a pin count of 8. Providing power to the device is a supply voltage of 12V. There are several parts that can be founded that are related to the base part number. In computers and other communications devices, there are 8 pins, which are pronged contacts. This device is designed to operate at a minimum operating temperature -40°C to ensure its reliability. To ensure reliability, the device operates at a maximum operating temperature of 85°C. The part is included in Analog Special Function Converters. This should be used if the supply voltage (Vsup) exceeds 12V. In this case, 28V is the maximum supply voltage (Vsup). It operates at a frequency of 10kHz. During operation, the maximum supply current is 6mA.

LM2907MX-8 Features
8-SOIC (0.154, 3.90mm Width) package
8 terminations
8 pin count
8 pins
The maximal supply current of 6mA

LM2907MX-8 Applications
There are a lot of Texas Instruments LM2907MX-8 V/F & F/V Converters applications.

Speed Governors
Frequency Meters/Tachometer
Cruise Control
Voltage to Frequency Conversions
Frequency-to-Voltage Conversion (Tachometer)
Tachometers
Touch or Sound Switches
Automotive Door L ock Control
Automotive Sensing
Remote-Sensor Monitoring

LM2907MX-8 More Descriptions

LM2907/LM2917 Frequency to Voltage Converter | IC CONVERTER FREQ-VOLTAGE 8-SOIC
IC F/V CONV 10KHZ 8SOIC
FVC 8-Pin SOIC N T/R
LM2907-8 T/R SOIC PKG
The LM2907, LM2917 series are monolithic frequency to voltage converters with a high gain op amp/comparator designed to operate a relay, lamp, or other load when the input frequency reaches or exceeds a selected rate. The tachometer uses a charge pump technique and offers frequency doubling for low ripple, full input protection in two versions (LM2907-8, LM2917-8) and its output swings to ground for a zero frequency input. The op amp/comparator is fully compatible with the tachometer and has a floating transistor as its output. This feature allows either a ground or supply referred load of up to 50 mA. The collector may be taken above VCC up to a maximum VCE of 28V. The two basic configurations offered include an 8-pin device with a ground referenced tachometer input and an internal connection between the tachometer output and the op amp non-inverting input. This version is well suited for single speed or frequency switching or fully buffered frequency to voltage conversion applications. The more versatile configurations provide differential tachometer input and uncommitted op amp inputs. With this version the tachometer input may be floated and the op amp becomes suitable for active filter conditioning of the tachometer output. Both of these configurations are available with an active shunt regulator connected across the power leads. The regulator clamps the supply such that stable frequency to voltage and frequency to current operations are possible with any supply voltage and a suitable resistor.

Certification