Fairchild/ON Semiconductor KA393DTF

KA393DTF Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .This chip is designed with the Tape & Reel (TR) package.The comparator has 8 terminals.The electrical component here belongs to the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.It's a typical General Purpose comparator.The total number of elements is 2 .The recommended mounting type is Surface Mount .As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.There are 8 pins on the comparator.Try search KA393 to get more pin-to-pin solutions for your special needs.There is 2.5mA current flowing in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.The nominal supply current of the device should be 600μA for normal use.A supply current exceeding 1mA may result in the comparator malfunctioning.5V power supplies are enough to run the device.Electronic comparator is possible to input up to 250nA current into the device.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 106.02dB .In order to operate normally, a supply voltage of 0 is required.With a TR package, this device is designed for general use (usually in ADC circuits).

KA393DTF Features
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB

KA393DTF Applications
There are a lot of ON Semiconductor KA393DTF linear comparators applications.

Mobile Phones
High-Speed Sampling Circuits
Window Comparators
Battery-Powered Electronics
Notebooks and PDAs
System control and monitoring
Limit Comparators
Point of load regulators
Analog front end
Zero-Crossing Detectors