Aeroflex Metelics, Division of MACOM JANTX1N5311UR-1

JANTX1N5311UR-1 Overview
In package Bulk, buck boost converter is included.In the way voltage regulator is packaged, voltage regulator is in the form of a DO-213AB, MELF (Glass).Mounted by Surface Mount, this current regulator is a semiconductor.There should be no temperature above -65°C~175°C at the time of operation.Voltages of 100V Max can be input as input voltages in this module.In the case of 2 terminations, which are the practice of terminating a transmission line with a voltage regulator that has the same characteristic impedance as the line itself, they are fairly common.Computers or other communication constant current regulators have 2 pins, which are pronged contacts.This electronic part is mounted in the way of Surface Mount.In addition to the maximum design flexibility that 3.6mA provides, its output current is also quite high.As long as 100V is supplied with the maximum voltage, it is supported.There are FPGAs of this type in the Military, MIL-PRF-19500/463 series.A 1-element structure.A characteristic of constant current regulator is also METALLURGICALLY BONDED.

JANTX1N5311UR-1 Features
Bulk package
The maximal supply voltage of 100V
Military, MIL-PRF-19500/463 series
1 elements

JANTX1N5311UR-1 Applications
There are a lot of Microsemi Corporation JANTX1N5311UR-1 Current Regulation/Managements applications.

Smart battery packs
Vehicle dynamic controls
Motor controls
Battery chargers
Current sensing
Programmable current source
Power management
Transmission controls
Battery management
Over current monitor