Texas Instruments INA241B5QDDFRQ1
- Part Number:
- INA241B5QDDFRQ1
- Manufacturer:
- Texas Instruments
- Ventron No:
- 6402966-INA241B5QDDFRQ1
- Description:
- AEC-Q100, -4-V to 110-V bidirectional high-precision current sense amp with enhanced PWM rejection
- Datasheet:
- ina241b-q1
- Product typeAnalog output
- Common-mode voltage (max) (V)110
- Common-mode voltage (min) (V)-5
- Input offset (±) (max) (V)0.00015
- Input offset drift (±) (typ) (V/°C)0.0000005
- Voltage gain (V/V)10
- CMRR (min) (dB)120
- Bandwidth (MHz)1
- Supply voltage (max) (V)20
- Supply voltage (min) (V)2.7
- Iq (max) (mA)3.2
- Number of channels1
- FeaturesBi-directional
- RatingAutomotive
- TI functional safety categoryFunctional Safety-Capable
- Operating temperature range (°C)-40 to 125
The INA241x-Q1 is an ultra-precise, bidirectional current sense amplifier than can measure voltage drops across shunt resistors over a wide common-mode range from –5 V to 110 V, independent of the supply voltage. The high-precision current measurement is achieved through a combination of low offset voltage (±10 µV, maximum), small gain error (±0.01%, maximum) and a high DC CMRR (typical 166 dB). The INA241x-Q1 is designed for high voltage, bidirectional measurements in switching systems that see large common-mode voltage transients at the devices inputs. The enhanced PWM rejection circuitry inside the INA241x-Q1 ensures minimal signal disturbance at the output due to the common-mode voltage transitions at the input.
The INA241x-Q1 operates from a single 2.7 V to 20 V supply, drawing 2.5 mA of supply current. The INA241x-Q1 is available in five gain options: 10 V/V, 20 V/V, 50 V/V, 100 V/V, and 200 V/V. Multiple gain options allow for optimization between available shunt resistor values and wide output dynamic range requirements.
The INA241x-Q1 is specified over operating temperature range of −40°C to 125°C and is offered in a space-saving 8-pin SOT-23 and 8-pin VSSOP package.
Latest News
-
22 December 2023
STM32F429IGT6 Microcontroller: Feature-Rich Embedded System Design
Ⅰ. What is STM32F429IGT6?Ⅱ. Application fields of STM32F429IGT6Ⅲ. Naming rules of STM32F429IGT6Ⅳ. Precautions for using STM32F429IGT6Ⅴ. STM32F429IGT6 characteristicsⅥ. Power supply diagram of STM32F429IGT6Ⅶ. Specifications of STM32F429IGT6Ⅷ. How to... -
22 December 2023
SS8050 NPN Epitaxial Silicon Transistor: Ideal for Small Power Amplification and Switching Applications
Ⅰ. Introduction of SS8050Ⅱ. Technical parameters of SS8050 transistorⅢ. NPN-type transistor and PNP-type transistorⅣ. How to use SS8050 transistor?Ⅴ. Electrical characteristics of SS8050 transistorⅥ. What is the difference... -
25 December 2023
N76E003AT20 Microcontroller: The Intelligent Engine of Embedded Systems
Ⅰ. What is N76E003AT20?Ⅱ. Characteristics of N76E003AT20 microcontrollerⅢ. N76E003AT20 dimension and packageⅣ. Operating modesⅤ. Who produces N76E003AT20 microcontroller?Ⅵ. N76E003AT20 microcontroller specificationsⅦ. What are the uses of N76E003AT20 microcontroller?Ⅷ.... -
25 December 2023
ULN2803ADWR Darlington Transistor Array Advantages, Market Trends, Applications, Pinout and Feature Description
Ⅰ. ULN2803ADWR overviewⅡ. What are the advantages of the ULN2803ADWR chip?Ⅲ. Market trends of ULN2803ADWRⅣ. Where is ULN2803ADWR mainly used?Ⅴ. Symbol, footprint and pin configuration of ULN2803ADWRⅥ. Precautions...
Help you to save your cost and time.
Reliable package for your goods.
Fast Reliable Delivery to save time.
Quality premium after-sale service.