Texas Instruments INA199A3RSWT

INA199A3RSWT Overview
Buck boost converter is included in the package Tape & Reel (TR).Voltage regulator is packaged in the way of 10-UFQFN.This electronic part is mounted in the way of Surface Mount.A maximum operating temperature of -40°C~125°C should not be exceeded during operation.Voltages of -0.3V~26V can be input as input voltages in this module.An example of this is the 10 termination, which is a procedure in which a transmission line is terminated with a voltage regulator that is equal in impedance to the line characteristics.Current regulator belongs to INA199 family.When a computer or other communication constant current regulator has 10 pins, these are pronged contacts.Using Surface Mount as a mounting system, this current regulator is mounted.It should work as long as it is powered by a 5VV power source. If it does not, it will not work.IC POWER SUPPLY SUPPORT CIRCUIT is the power converter's analog IC.Channels are becoming stronger/weaker based on the following statistics: 1.There is a maximum voltage to be supplied to 26V by it.With the minimum supply voltage of 2.7V, it is able to operate.It reaches 65μA when the operating supply current is supplied for its operation.As 100μA has a maximal supply current, its current regulator's design flexibility is maximi100μAed.Current regulations have 46.02dB voltage gains, which are simple ratios between the output voltage and the input voltage.

INA199A3RSWT Features
Tape & Reel (TR) package
INA199 family
The maximal supply voltage of 26V

INA199A3RSWT Applications
There are a lot of Texas Instruments INA199A3RSWT Current Regulation/Managements applications.

Over-current measurement
Automotive current measurement
Over current monitor
Vehicle dynamic controls
Over-current protection
Level translating
Engine management
Suspension controls
Motor controls
Programmable current source