Texas Instruments INA126PG4

INA126PG4 Overview
There is a PDIP case in which the instrumentation amplifier is packaged. Buffer amps of this type are called INSTRUMENTATION AMPLIFIER-types. A Rail/Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Instrumentation Amplifier devices. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 250μV. It is possible to operate this buffer amplifier from a supply current of 175μA . There should be no change in the voltage gain. Op amp ic has 1 channels. In order for this buffer op amp to function, it should have a temperature of at least -55°C degrees Celsius. At temperatures greater than 125°C, op amp should not be used. There is a rating of 2 for the operating supply voltage of the buffer op amp. The electrical part is capable of being powered by a voltage of under 36V, which means that it can be used with any voltage supply. As a rule of thumb, the supply voltage of the op amp should not be lower than 2.7V. As a general rule, you should conduct this electronic component under dual supply voltages of 18V volts. There is an 175μA quiescent current running through op amp ic. 1GOhm is the range in which the instrumentation amplifier resistance should lie.

INA126PG4 Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 1GOhm


INA126PG4 Applications
There are a lot of Texas Instruments
INA126PG4 Instrumentational OP Amps applications.


Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control