Texas Instruments INA122UAG4

INA122UAG4 Overview
There is a SOIC case package that contains the instrumentation amplifiers. The instrumentation amplifier in this picture is of the INSTRUMENTATION AMPLIFIER-type. Upon delivery, op amp ic is packaged in a Rail/Tube case. We are approaching the 8h termination of the year. In total, there are 8 pins on this op amp ic. This linear amplifier should be powered by an 15V battery. There are two types of Instrumentation Amplifier op amps in this case, and this device falls into one of them. 8 pins are located on the operational amplifiers. The input offset voltage is 500μV. The buffer amplifier is capable of operating from a supply current of 60μA . It is recommended to keep the voltage gain at 80dB at all times. On the buffer amps, there are 1 channels that can be used. For this linear amplifier to work, the temperature should not be below -40°C. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 85°C. The total number of elements in this buffer amplifier is 2. The operating supply voltage of the buffer op amp is rated at 5V. Under 36V is the minimum supply voltage for this electric component. Over 2.2V is a recommended supply voltage for buffer ampsIn order for this electronic part to be conducted successfully, you should use a dual supply voltage of 18V. 60μA quiescent currents are flowing through buffer op amp. In order for the op amp resistance to remain within the 10GOhm range, the op amp should be tested.

INA122UAG4 Features
8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 10GOhm


INA122UAG4 Applications
There are a lot of Texas Instruments
INA122UAG4 Instrumentational OP Amps applications.


Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection
Signal amplification
Signal filtering
Signal operation