STMicroelectronics HCF4047BEY

HCF4047BEY Overview
Multivibrator is packaged in 14-DIP (0.300, 7.62mm) case.Multivibrator is advised to pack the equipment in case of Tube.Multivibrator is recommended that you use a Through Hole mounting type for Multivibrator.Part Astable, Monostable includes logic type Astable, Monostable.There is a vote within 3V~20V.There is an electrical component included in the 4000B series.During the operation of this part, the minimum operating temperature must not exceed -55°C~125°C degrees Celsius.The output of 6.8mA 6.8mA is low in terms of current while it is high in terms of voltage.Designed based on the HCF4047 family, the component features a number of features.The total number of terminations is 14.There is no problem with the device handling the 5V voltage.It has 2 inputs for data or clock.There are a total of ten 14 pins on the part.In this part, you can find 14 pins.Through Hole mounts the device on top of the base.During quiescent time, it consumes current at 20μA.The operating supply voltage for the chip is specified as 12V volts.There is a limit on the amount of output current that can be provided to the device, which is called 6.8mA.Additional features of the part can be found by searching: RETRIGGERABLE; FREE RUNNING/GATABLE ASTABLE OPERATING MODES WITH OSCILLATOR OUTPUTThe element has 1 elements.An input current of 20μA is the maximum it can handle.

HCF4047BEY Features
in 14-DIP (0.300, 7.62mm) package
Mounting Type: Through Hole
Logic Type: Astable, Monostable
Operating Temperature: 4000B
based on HCF4047
Supply Voltage: 5V
Quiescent Current at 20μA
output current at 6.8mA

HCF4047BEY Applications
There are a lot of STMicroelectronics HCF4047BEY applications of multivibrators.

Envelope detection
Puls delay and timing
Astable multivibrator
Pulse shaping
GPS: Personal Navigation Devices
AV Receivers
Mobile Internet Devices
Timing clrcults
Video Analytics Servers
Personal Digital Assistant (PDA)