Lattice Semiconductor Corporation GAL20V8C-7LJ

GAL20V8C-7LJ Overview
The JESD-609 Code for this particular part is e0, indicating that it follows the standards set by the Joint Electron Device Engineering Council. However, despite meeting these standards, the Part Status is listed as Obsolete, meaning that it is no longer in production. The Terminal Form for this part is J BEND, which refers to the shape of the terminals on the device. It requires a Supply Voltage of 5V and operates at a Frequency of 125MHz. The Base Part Number is GAL20V8, indicating the specific type of programmable logic device. The Operating Supply Voltage is also 5V, and the Propagation Delay is 7.5 ns, which is the time it takes for a signal to travel through the device. The Number of Macro Cells is 8, representing the number of basic logic units within the device. Finally, the Length of the part is 11.5062mm, providing the physical dimensions of the device.

GAL20V8C-7LJ Features
28-LCC (J-Lead) package
8 I/Os
The operating temperature of 0°C~75°C TA
28 pin count
28 pins
5V power supplies
8 outputs

GAL20V8C-7LJ Applications
There are a lot of Lattice Semiconductor Corporation GAL20V8C-7LJ CPLDs applications.

Address decoders
Page register
Dedicated input registers
Multiple Clock Source Selection
Network Interface Card (NIC) and Host Bus Adapter (HBA)
TIMERS/COUNTERS
Reset swapping
Timing control
Programmable polarity
Battery operated portable devices